Wire Pulling Foam Lubricant
51100 - spec sheet
Features
- Coats better and is 30-percent more slippery than gel or wax lubricants
- Made in USA
- Coats Better and 30% More Slippery than Gel or Wax Lubricants
- One can equals four quarts of wax/gel lubricants. Based on jobsite pulls with foam in 3/4-Inch conduit when used as directed
- No mess formula stays where it is applied and wipes clean from hands and fabric
- 4X greater yield than gel or wax lubricants
Warnings
- Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F. Do not transport or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature.
- For industrial and commercial use only.
- Keep out of reach of children.
- Do not use wet product on live circuits. Compound is electrically conductive before it dries.
- DANGER - Extremely Flammable.
51100 - spec sheet
Manufacturer Resources
Product Specs
- Application:
- Wire Pulling
- Container:
- Aerosol Can
- Depth:
- 10.2500 in
- Height:
- 2.8000 in
- Size:
- 19 oz (0.6 L)
- Type:
- Foam
- Weight:
- 1.2 lb (0.5 kg)
- Width:
- 2.8000 in
- Working Temperature:
- 40° F to 100° F (4° C to 38° C)