Square D Square-Duct Wireway, ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$119.81
Square D Square-Duct Wireway, Hinged Cover, Galvanized Steel

Square D Square-Duct Wireway, Hinged Cover, Galvanized Steel

(No reviews yet) Write a Review

Model: LDB82

In Stock (leaves warehouse same day if ordered before 3pm ET)

$119.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D Square-Duct Wireway, Hinged Cover, Galvanized Steel

The Square D Square-Duct wireway is a fully enclosed section designed for organizing and protecting electrical conductors in commercial and industrial wiring systems. Built from 14 gauge galvanized steel without knockouts and finished in gray polyester powder (ANSI 49), this NEMA 1 rated wireway features a hinged cover with provisions for sealing, giving installers convenient access while keeping wiring secured. Square-Duct sections are commonly used for ganging meter devices, panelboards, switches, and circuit breaker enclosures. This Square D wireway is UL Listed and CSA certified for use in professional electrical installations.

Key Features

  • Hinged Cover: Removable, hinged cover design with provisions for sealing provides convenient access to conductors while keeping the enclosure secure.
  • Durable Construction: Fabricated from 14 gauge galvanized steel without knockouts for a rugged, corrosion-resistant enclosure.
  • Finish: Gray polyester powder coat finish (ANSI 49) adds an extra layer of surface durability.
  • NEMA 1 Rating: Rated NEMA 1 for general-purpose indoor protection of enclosed conductors.
  • Ganging Applications: Designed to gang meter devices, panelboards, switches, and circuit breaker enclosures into a single connected wireway run.
  • Completely Enclosed Sections: Each length is a fully enclosed section, keeping wiring protected and organized along the run.

Certifications & Compliance

  • UL Listed
  • CSA Certified

Technical Specifications

  • Toxic Heavy Metal Free: Yes
  • Warranty: 18 months
  • Rohs Exemption Information: Yes
  • Mercury Free: Yes
  • Reach Free Of Svhc: Yes

Typical Applications

  • Meter Device Ganging
  • Panelboard and Switch Enclosures
  • Circuit Breaker Enclosure Wiring
  • Commercial and Industrial Wire Management
  • Indoor Electrical Installations

Why Square D?

Square D Square-Duct wireways combine durable 14 gauge galvanized steel construction with a protective gray polyester powder finish for long service life in demanding electrical installations. Backed by UL Listing and CSA certification along with an 18 month warranty, this hinged-cover wireway delivers the code-compliant reliability professionals expect when ganging meter devices, panelboards, and circuit breaker enclosures.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Wireway
Product Finish:
Gray Polyester Powder
Configuration:
NEMA 1
Listing:
UL Listed
Standards:
CSA
Product Material:
Galvanized Steel
Department:
Electrical
Product Group:
Conduit & Raceway
Product Subgroup:
Wireway
Product Length:
2 ft

Square D LDB82 – Frequently Asked Questions

1) Can the Square D LDB82 Square-Duct wireway be used outdoors or in a washdown area?
No. The LDB82 Square-Duct section is NEMA 1, which is general-purpose indoor protection only. It will not keep out rain, dust, or hose-down water. For a wet or outdoor location you need a rainproof or watertight trough instead, not this one.
2) How long is a section of Square D LDB82 Square-Duct, and how do I cover a longer run?
Each LDB82 section is 2 feet long and is a completely enclosed section. For a longer run you gang multiple sections together, which is exactly what Square-Duct is built to do: it joins meter devices, panelboards, switches, and circuit breaker enclosures into one connected wireway run. Order enough 2 ft sections to make up your total length.
3) Does the Square D LDB82 wireway come with knockouts for conduit entry?
No knockouts. The LDB82 is fabricated from 14 gauge galvanized steel without knockouts, so every conduit or nipple entry has to be field-punched or drilled where you need it. Plan your hole locations before mounting the section.
4) Can I use Square-Duct wireway to tie together a bank of meter sockets and panelboards?
That is its primary job. Square-Duct sections are made to gang meter devices, panelboards, switches, and circuit breaker enclosures into one connected run, with conductors fully enclosed between the enclosures. The hinged cover gives you access to the gutter conductors after the equipment is set.
5) I need a longer wireway run than 2 feet - what are my options?
The Square D LDB82 Square-Duct section is a 2 ft length. For longer single sections, the Milbank 101048-GSC1 is a 10 x 10 x 4 ft trough enclosure in the BP104 series, the Milbank 4448-GSC1 is a 4 in x 4 in x 4 ft NEMA 1 screw-cover wireway trough in the BP44 series, and the Hoffman Econotrough F6636RTG is a 36 in galvanized steel wireway trough. Note the Milbank BP44 uses a screw cover rather than the hinged cover on the Square-Duct section, so access differs once the run is energized and closed up.
6) Hinged cover or screw cover wireway, which should I use?
A hinged cover like the one on the Square D LDB82 stays attached when you open it, which matters where you are pulling or troubleshooting conductors repeatedly and do not want to juggle a loose cover and a handful of screws on a ladder. It is removable as well, and has provisions for sealing. A screw-cover trough, such as the Milbank BP44 Series 4 x 4 x 4 ft, is the choice where the enclosure is opened rarely and you want the cover positively fastened along its full length.
7) How durable is the finish on the Square D LDB82 wireway for an industrial plant room?
Construction is 14 gauge galvanized steel, with a gray polyester powder coat (ANSI 49) over it for added surface durability. The galvanizing under the powder gives corrosion resistance in dry indoor plant and electrical rooms. It is still a NEMA 1 enclosure, so it is not a substitute for a corrosion-rated enclosure in a chemical or wet environment.
8) What else does ZenSupply carry if I need a lay-in wireway instead of a hinged-cover Square-Duct section?
The Square D LDB82 is a hinged-cover enclosed section. If your pull is easier with a lay-in style, Hoffman's F Series straight sections are the alternative we stock, including the F1010T1 Series in 10 x 10 inch steel and the F44T148G in 14/16 gauge steel. Hoffman's Econotrough galvanized steel trough in 36 inch length is another option for a plain trough run.
9) Does the Square-Duct LDB82 carry the same NEMA 1 indoor rating as the Milbank screw-cover troughs?
Yes. The Square D LDB82 Square-Duct is NEMA 1 rated for general-purpose indoor protection and is UL Listed and CSA certified. The Milbank 4448-GSC1 is likewise a NEMA 1 screw-cover wireway trough. Both are indoor, general-purpose enclosures - neither is intended for wet or outdoor locations, so a run exposed to weather needs a different enclosure type entirely.
10) We standardized on Milbank BP101 troughs - is the Square D Square-Duct a drop-in for that run?
Treat it as a different system, not a drop-in. The Milbank P472094 is a BP101 series 10 x 10 wireway trough, and Milbank's 10 x 10 family continues with the BP102 at 2 ft and the BP104 at 4 ft. The Square D LDB82 Square-Duct is a 2 ft enclosed hinged-cover section in 14 gauge galvanized steel. Flange hole patterns and connector hardware follow each manufacturer's own series, so for mid-run additions to an existing Milbank 10 x 10 trough line, staying within the BP series keeps the joints and covers consistent.
11) Is there a spec sheet for the Square D LDB82 Square-Duct wireway?
Yes, a Square D spec sheet is published with the LDB82 and is the document to pull for submittal packages on a commercial job. Manufacturer part number is LDB82.
12) Does the Square D LDB82 wireway contain lead, mercury, or other restricted substances?
No. The Square-Duct hinged-cover section is listed as toxic heavy metal free and mercury free, and free of REACH SVHC substances. That is usually what a government, healthcare, or education procurement spec is checking for on enclosure products.
How fast can I get the Square D LDB82 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D LDB82 come with a warranty?
Absolutely. The Square D LDB82 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D LDB82?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D LDB82 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!