You may also like
Wood Bit Quik-Bit Flat 1-1/2" 6" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics QB17 – Frequently Asked Questions
1) What size hole does the Metallics QB17 Quik-Bit wood bit drill, and how deep can it reach?
The QB17 is a 1-1/2 inch diameter flat (spade-style) wood boring bit with a 6 inch overall length, so it bores 1-1/2 inch holes through standard framing lumber in a single pass. The 6 inch length gives enough reach for a 2x4 or 2x6 stud or a doubled plate without needing an extension.
2) Is a 1-1/2 inch flat wood bit big enough for the conduit or cable I am running through studs?
A 1-1/2 inch bore handles multiple NM cable runs and clears common small-trade conduit. If you need a larger pass-through for bundled runs or bigger raceway, step up to a larger diameter bit; this one is fixed at 1-1/2 inches and will not be enlarged by re-drilling cleanly.
3) Should I use a flat spade bit like the QB17 or an auger bit for drilling studs?
A flat bit like the QB17 cuts fast and cheap in softwood framing and clears a 1-1/2 inch hole quickly, which is why electricians keep them in the pouch for stud and plate drilling. An auger pulls itself through and tracks straighter in deep or hardwood stock, and a selfeed bit is better for repeated large bores in joists. For general rough-in boring through pine studs, the flat bit does the job.
4) Is the QB17 meant for wood only, or can I drill metal studs with it?
Wood only. It is a wood boring bit ground for timber framing and plywood. Metal studs need a step bit or a bi-metal hole saw; running this bit into steel will roll the cutting edges over.
5) How many bits come with the Metallics QB17, and how is it packaged?
One bit per order. The QB17 ships as a single piece in a pouch, so if you are outfitting a crew or want spares for a rough-in job, order the quantity you need rather than expecting a multi-bit set.
6) Will the Metallics QB17 wood bit fit a standard drill chuck?
Yes. Flat wood bits of this type use a hex shank that seats in a standard keyless or keyed drill chuck as well as in an impact driver chuck, so the QB17 runs off the drill already on the cart.
7) What is the exact part number to order the Metallics 1-1/2 inch Quik-Bit?
Order it as Metallics QB17. That is the manufacturer part number for the 1-1/2 inch by 6 inch flat Quik-Bit wood bit sold one per pouch.
How fast can I get the Metallics QB17 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QB17 come with a warranty?
Absolutely. The Metallics QB17 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QB17?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics QB17 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.