You may also like
Wood Bit Ship Auger Dia 3/4" 18" Hex Shank (1 pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics AL34 – Frequently Asked Questions
1) What size hole does the Metallics AL34 ship auger drill, and how deep can it reach?
The AL34 is a 3/4 inch diameter ship auger with an 18 inch overall length, so it bores a 3/4 inch hole and gives you the reach to pass through stacked studs, double top plates, or deep joists in one pass. The 3/4 inch bore is the size electricians most often use for pulling NM cable through framing.
2) Will the AL34 auger fit a cordless impact driver?
Yes. The AL34 has a hex shank, so it drops into a quick-change impact driver or impact wrench chuck as well as a keyed or keyless drill chuck. That is the usual setup for overhead boring where you do not want a bit slipping in a round-shank chuck.
3) Should I use a ship auger or a self-feed bit for boring studs for electrical runs?
A ship auger like the 3/4 inch AL34 is the choice for long, deep holes and for framing that may hold nails or screws, because the single-spur cutting head and open flute clear chips over an 18 inch run without binding. A self-feed bit is faster in a single plate but pulls hard and is short, so it will not reach through stacked members. For a rough-in where you are drilling a line of studs or reaching into a bay, the auger is the one that gets through.
4) Is AL34 the actual Metallics part number to order?
Yes, AL34 is the Metallics manufacturer part number for the 3/4 inch by 18 inch hex shank wood ship auger. It is sold as a single model with no size or finish options to specify.
5) How many bits come in a Metallics AL34 order?
One bit per order. The AL34 ships as a single piece in a pouch, so if you are stocking a crew or a service van you order one per truck rather than a set.
How fast can I get the Metallics AL34 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics AL34 come with a warranty?
Absolutely. The Metallics AL34 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics AL34?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics AL34 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.