Metallics JRM95SLT 10-24 x 1-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.21
$0.21
Metallics JRM95SLT 10-24 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM95SLT 10-24 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM95SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.21
$0.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1-1/2 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Round head with slotted Drive
    • Steel Zinc Material
    • 10-24 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
1/1/02
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.22 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM95SLT – Frequently Asked Questions

1) How much does the round head stand off the surface, and will it clear a cover plate?
Head height runs 0.123 to 0.137 in. and head width 0.334 to 0.359 in. on these 10-24 round head screws, so the head sits roughly an eighth of an inch proud of the surface with a domed profile. That is fine behind a raised cover or in open framing, but if you need the head flush or flat under a tight plate, use a flat or pan head instead of this round head.
2) How many 10-24 x 1-1/2 machine screws come in a pack from Metallics?
They ship 100 to a jar, and 100 count is the order minimum. So one order unit gets you a jar of 100 of the 10-24 x 1-1/2 in. round head slotted screws, not a loose single screw.
3) Are these machine screws self-tapping, or do I need a tapped hole or nut?
Machine screws, not self-tappers. The JRM95SLT has a uniform 10-24 machine thread and needs a pre-tapped 10-24 hole, a 10-24 nut, or a threaded insert. It will not cut its own thread in sheet metal the way a tapping screw does.
4) Are these zinc machine screws OK for a damp location or outdoors?
These are steel with a zinc finish, which handles indoor and protected damp conditions but will eventually corrode in direct weather, wash-down or coastal exposure. For exterior or corrosive locations, step up to a stainless machine screw in the same 10-24 x 1-1/2 size.
5) What is the tensile strength and hardness of these Metallics steel machine screws?
Minimum tensile strength is 60,000 psi with hardness of Rockwell B70 to B100, made from AISI 1006 to 1022 low carbon steel. That is standard commercial-grade machine screw stock, right for device mounting, strap and bracket work, and panel assembly, not for structural or high-load bolted joints where a graded bolt is specified.
6) Do these screws meet Buy American or ARRA requirements for a government job?
Metallics lists the JRM95SLT as both ARRA compliant and Buy American compliant, with country of origin China. If your contract language requires domestic melt and manufacture rather than the ARRA/Buy American compliance designation, confirm that distinction against your spec before you submit them.
7) How much does a jar of 100 of these 10-24 x 1-1/2 screws weigh?
About 1.22 lbs for the packaged jar of 100. Useful if you are building a truck stock list or kitting out multiple service vans.
How fast can I get the Metallics JRM95SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM95SLT come with a warranty?
Absolutely. The Metallics JRM95SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM95SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM95SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!