Metallics JSRM74P 10-24 x 1-3/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSRM74P 10-24 x 1-3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM74P 10-24 x 1-3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM74P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 1-3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Round head with Phillips Drive
    • 10-24 Diameter, 1-3/4" Length
    • 18-8 stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
1/3/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.093 - 0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.32 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM74P – Frequently Asked Questions

1) How many screws come in a jar of Metallics JSRM74P 10-24 machine screws?
The JSRM74P ships 100 screws to a jar, and 100 is the order minimum. If you need a different count or a different length, Metallics offers other sizes and quantities by request.
2) Will a 10-24 round head screw sit flush, or does the head stand proud?
It stands proud. A round head is not a countersinking head, so it bears on the surface of the part. Figure on a head 0.334 to 0.359 inch across and 0.123 to 0.137 inch tall sitting above the material. If you need the head buried in a countersunk hole, you want a flat head machine screw instead.
3) Will 10-24 x 1-3/4 machine screws thread into a standard electrical box or device?
10-24 is the thread used for box mounting and grounding screws in standard electrical work, and these are cut 24 threads per inch to match. At 1-3/4 inches long they are much longer than a stock device screw, so they suit mounting through furring, plaster rings or spacers rather than a flush-mount device.
4) Do these Metallics stainless screws meet Buy American or ARRA requirements for a public job?
No. The JSRM74P is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. On a federally funded project with domestic sourcing language, these will not satisfy it.
5) What driver bit do I need for the JSRM74P round head Phillips screws?
A #2 Phillips bit. The recess runs 0.182 to 0.195 inch in diameter and 0.093 to 0.119 inch deep, which is standard #2 territory, so a worn or undersized bit is the usual cause of cam-out on these.
6) Can I use 18-8 stainless 10-24 machine screws outdoors or in damp locations?
18-8 stainless is the usual choice for wet or corrosive spots where plated steel would rust out, which is why these get used on electrical, plumbing and HVAC work. Keep in mind stainless is softer than hardened steel: these run Rockwell B85-B95 with an 80,000 psi minimum tensile, so don't gorilla them down in a tapped hole.
7) Is there a published strength rating I can put on a submittal for these stainless machine screws?
Metallics lists 80,000 psi minimum tensile and Rockwell B85-B95 hardness against the SAE material standard. Treat the tensile figure as an approximation: there is no single performance standard for stainless machine screws, and Metallics says so outright. If the engineer wants a graded fastener, specify a carbon steel grade rather than 18-8.
8) Do machine screws like these cut their own threads, or do I need a tapped hole?
Machine screws don't form threads. The JSRM74P needs a tapped hole or a nut on the back side, so for sheet metal or wood you want a self-tapping or sheet metal screw instead. Full length is 1-3/4 inches measured under the round head, since round head lengths are taken from the bearing surface.
How fast can I get the Metallics JSRM74P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM74P come with a warranty?
Absolutely. The Metallics JSRM74P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM74P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM74P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!