Metallics JSRM82P 10-24 x 3 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSRM82P 10-24 x 3 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM82P 10-24 x 3 in. Round Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM82P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 3 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Round head with Phillips Drive
    • 18-8 stainless Material
    • 10-24 Diameter, 3" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
3
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.093 - 0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Recess Penetration Gaging Depth:
0.082 - 0.108
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM82P – Frequently Asked Questions

1) Will the Metallics JSRM82P screws satisfy a Buy American or ARRA requirement on a federal job?
No. The JSRM82P is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. For a federally funded project with domestic sourcing language, these won't qualify.
2) Is 10-24 the same as 10-32? I don't want to cross-thread my brackets.
They are not interchangeable. The JSRM82P is 10-24, meaning 24 threads per inch, the coarser of the two #10 machine threads. A 10-32 tapped hole will not accept it, and forcing it damages the threads. Check the existing screw or tapped hole before substituting.
3) What driver bit do I need for the Metallics JSRM82P 10-24 machine screws?
A #2 Phillips bit. The JSRM82P uses a Phillips drive with a recess diameter of 0.182 to 0.195 in. and a recess depth of 0.093 to 0.119 in., so a #2 seats properly without camming out. A #1 will spin in the recess and a #3 won't bottom.
4) Are these 18-8 stainless screws alright for outdoor or damp locations?
The JSRM82P is made from 18-8 stainless, the common 300-series austenitic grade used for general corrosion resistance, so it holds up in damp interior, exterior and wash-down areas far better than plated steel. It is not a marine-grade 316, so in salt spray or pool chemical environments expect surface staining over time.
5) How strong is a 10-24 stainless machine screw, and can I torque it like a hardened steel screw?
Tensile strength is 80,000 psi minimum with a hardness of Rockwell B85 to B95. Stainless machine screws are softer and more prone to galling than hardened plated steel, so drive them with hand tools or a clutched driver rather than full impact. Metallics also notes that tensile figures for stainless screws are approximations, since there is no single performance standard for stainless machine screws.
6) Do these machine screws come with nuts, or do I need to order them separately?
Nuts are not part of the JSRM82P pack, it is 100 screws in a jar. If you're through-bolting rather than threading into tapped metal, order 10-24 stainless nuts and washers separately so the hardware matches the 18-8 material and avoids mixing metals.
7) How are the Metallics 10-24 x 3 in. stainless machine screws packaged and what is the minimum order?
They ship in a jar, 100 pieces, and 100 count is the order minimum. So this is a shop or truck-stock quantity rather than a loose-piece buy.
How fast can I get the Metallics JSRM82P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM82P come with a warranty?
Absolutely. The Metallics JSRM82P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM82P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM82P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!