Metallics JSRM22P 10-24 x 3/4 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JSRM22P 10-24 x 3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM22P 10-24 x 3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM22P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-24 x 3/4 in. Round Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Round head with Phillips Drive
    • 10-24 Diameter, 3/4" Length
    • 18-8 stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
4-Mar
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.093 - 0.119
Phillips Recess Diameter:
0.182 - 0.195
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.7 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM22P – Frequently Asked Questions

1) Will a Metallics JSRM22P 10-24 machine screw thread into a standard electrical box or device ear?
Yes. The JSRM22P is a 10-24 machine screw, 24 threads per inch, which is the thread used on standard steel outlet box tapped holes and on device mounting ears. Length is 3/4 inch, long enough to pick up the box threads with a plaster ring or shallow spacer in the stack.
2) What driver do I need for these Metallics round head Phillips machine screws?
A #2 Phillips bit. The recess is a Phillips with a 0.182 to 0.195 inch recess diameter and 0.093 to 0.119 inch depth, so a #2 seats fully; a #1 will cam out and a #3 will not bottom.
3) Is 18-8 stainless the right screw material for outdoor or damp-location work?
The JSRM22P is 18-8 stainless, which is the usual choice for wet, damp, and coastal exterior work where plated steel screws rust and seize. Hardness runs Rockwell B85 to B95 with a minimum tensile of 80,000 psi. Note that stainless tensile figures are approximations only, since there is no single performance standard for stainless machine screws.
4) Will the round head sit flush, or does it stand above the surface?
It stands proud. A round head is a domed, non-countersinking head: head height measures 0.123 to 0.137 inch and head width 0.334 to 0.359 inch, so the full head sits on top of the material. If you need the head buried in a countersunk hole, order a flat head instead.
5) How many Metallics JSRM22P screws come in a pack, and how are they packaged?
They ship in a jar of 100, which is also the order minimum (100 count). Shipping weight for the jar is 0.7 lbs.
6) Can I use a 10-24 machine screw where a self-tapping or sheet metal screw is called out?
No. A machine screw like the JSRM22P has a uniform 24 TPI machine thread and no cutting point, so it needs a pre-tapped hole or a nut. For fastening into untapped sheet metal, a self-tapping or sheet metal screw is the correct part.
7) Do these stainless machine screws qualify for a Buy American or ARRA-funded job?
The JSRM22P carries a Buy American compliance code of C and an ARRA compliance code of C, with country of origin listed as China. On a federally funded project, verify that the C designation satisfies your specific contract clause before submitting.
8) Are other lengths and quantities of the Metallics SRM machine screws available?
Yes. The SRM series covers other diameters, lengths, and pack quantities by request; the JSRM22P is the 10-24 x 3/4 inch round head Phillips in 18-8 stainless, jar of 100.
How fast can I get the Metallics JSRM22P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM22P come with a warranty?
Absolutely. The Metallics JSRM22P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM22P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM22P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!