Metallics JFMP92SS 10-32 x 1-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFMP92SS 10-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JFMP92SS 10-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFMP92SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 1-1/2 in. Flat Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • 10-32 Diameter, 1-1/2" Length
    • 18-8 Stainless Material
    • Flat head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.098 - 0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.333 - 0.362 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Gaging Diameter:
0.313
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.198
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.06 lbs
Product Width:
3 in
Protrusion Gaging Diameter:
0.025 - 0.042 Above
Sub Division:
Electrical-E H2
Tensile Strength:
1200 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNF
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFMP92SS – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFMP92SS 10-32 machine screws?
The JFMP92SS ships as a jar of 100 screws, and the jar is the minimum order quantity. If you need a different count or a different length, Metallics offers other sizes and quantities by request.
2) Will a 10-32 x 1-1/2 in. stainless machine screw work in a damp or wash-down area?
Yes. The JFMP92SS is 18-8 stainless, which is used where you need general atmospheric corrosion resistance, and it is common in food processing machinery and refrigeration equipment. Stainless also holds its strength better than plain steel when the application runs warm.
3) Are these Metallics stainless screws Buy American or ARRA compliant for a government job?
No. The JFMP92SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries domestic sourcing requirements, this part will not satisfy them.
4) What size Phillips driver do I need for the Metallics JFMP92SS machine screws?
A #2 Phillips. The recess is 0.198 in. diameter and 0.124 in. deep, so a #2 bit seats fully; a #1 will cam out and chew the recess on stainless.
5) How much load will a 10-32 18-8 stainless machine screw hold?
Rated at 1200 lb minimum tensile, with a hardness of Rockwell B85 to B95. Bear in mind there is currently no national performance standard for stainless machine screws, so those figures are published as a guide rather than a certified grade. If your drawing calls for a graded fastener with a certified proof load, a stainless machine screw is the wrong item.
6) Does the Metallics JFMP92SS meet dimensional spec for inspected work?
Head and recess dimensions are built to ASME B18.6.3-1998, with material to SAE. For gaging, the diameter is 0.313 with protrusion 0.025 to 0.042 above. That is the paperwork an inspector asks for on head geometry.
7) How much does a jar of 100 of these 10-32 stainless screws weigh for shipping?
A jar comes in at 1.06 lbs, with the container measuring 3 x 2.7 x 3 in. Light enough to drop several into a van stock kit without a thought.
How fast can I get the Metallics JFMP92SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFMP92SS come with a warranty?
Absolutely. The Metallics JFMP92SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFMP92SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFMP92SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!