Metallics JRM13SLT 10-32 x 5/1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.19
$0.19
Metallics JRM13SLT 10-32 x 5/16 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM13SLT 10-32 x 5/16 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM13SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.19
$0.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 5/16 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Steel Zinc Material
    • 10-32 Diameter, 5/16" Length
    • Round head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.123 - 0.137 in.
Fastener Head Type:
Round
Fastener Head Width:
0.334 - 0.359 in.
Fastener Length:
16-May
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.47 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.082 - 0.108
Slot Depth:
0.065 - 0.087
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM13SLT – Frequently Asked Questions

1) Will a 10-32 round head machine screw work in a standard electrical box or device bracket?
Yes. The Metallics JRM13SLT is a 10-32 machine screw, which is the thread used for device mounting and box ears on standard US electrical boxes, with 32 threads per inch. At 5/16 inch long it's a short screw, so use it where the threaded hole is shallow or where you're only picking up a bracket or cover, not where you need to span a deep stack of plaster rings.
2) How many Metallics JRM13SLT screws come in a jar, and can I buy fewer?
They ship in a jar of 100, and 100 count is the order minimum, so that's the smallest quantity you can take. Metallics notes other sizes and quantities are available by request.
3) Is the zinc finish on these steel machine screws suitable for outdoor or damp locations?
These are zinc plated carbon steel (AISI 1006-1022), which is a dry-location finish. Zinc plating handles indoor humidity and incidental moisture, but for wet locations, exterior boxes, or coastal air you want stainless rather than steel zinc. For interior panel, box, and device work the zinc plating is the normal choice.
4) Why a slotted drive instead of Phillips on these Metallics screws?
The JRM13SLT uses a single slot, 0.050 to 0.060 inch wide and 0.065 to 0.087 inch deep. Electricians still carry a flat blade for terminal and cover work, and slotted lets you drive by hand with controlled torque rather than cam out. If your crew is running impact or cordless drivers all day, a Phillips or combo head screw is the better match. Metallics has offered a full combo line since 1985.
5) Do these screws meet Buy American or ARRA requirements for a government job?
The JRM13SLT is flagged ARRA compliant and Buy American compliant in Metallics' data, with country of origin China. On a federally funded project, verify which standard your contract invokes, because those two flags and the origin need to line up with your spec before the submittal goes in.
6) What is the tensile strength and hardness of the JRM13SLT machine screw?
60,000 psi minimum tensile, with a hardness of Rockwell B70 to B100. That is standard low-carbon steel machine screw strength, fine for mounting devices, covers, brackets, and plates. If you're into a structural or high-torque joint, step up to a grade-rated cap screw instead.
7) How much does a jar of 100 of these machine screws weigh for shipping?
The 100 count jar is listed at 0.47 lbs, in a container measuring 3 inches by 3 inches by 2.15 inches. Light enough to throw several sizes in a van kit without thinking about it.
How fast can I get the Metallics JRM13SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM13SLT come with a warranty?
Absolutely. The Metallics JRM13SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM13SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM13SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!