Metallics PH223 10-32 x 5/8 Pa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.40
$0.40
Image coming soon

Metallics PH223 10-32 x 5/8 Pan Head Phillips Type 23 Thread Cutting Self-Tapping Screw Steel Zinc Chromate

(No reviews yet) Write a Review

Model: PH223

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.40
$0.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10-32 x 5/8 Pan Head Phillips Type 23 Thread Cutting Self-Tapping Screw Steel Zinc Chromate

Manufacturer Resources

Product Specs

Division:
Electrical H1
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws

Metallics PH223 – Frequently Asked Questions

1) What size screw is the Metallics PH223?
The Metallics PH223 is a 10-32 x 5/8 inch pan head Phillips screw. The 10-32 designation means a #10 diameter with 32 threads per inch, machine screw thread, and the 5/8 inch is the length under the head.
2) Do I need to tap the hole first for a Type 23 thread cutting screw?
No. The PH223 is a Type 23 thread cutting self-tapping screw, so it cuts its own 10-32 thread as it drives into a pilot hole. You drill the pilot, drive the screw, no separate tapping operation.
3) Will this screw thread into an existing 10-32 tapped hole in an electrical box or panel?
Yes. The PH223 carries a standard 10-32 machine thread, which is the common thread used for grounding screws and device mounting in outlet boxes and enclosures, so it will run into an existing 10-32 tapped hole as well as cut its own in untapped stock.
4) What is the zinc chromate finish on the PH223 for?
The PH223 is a steel screw with a zinc chromate plating, a sacrificial coating that gives the steel corrosion resistance in dry indoor electrical work. It is a plated finish, not stainless, so it is not intended for wet or corrosive exterior exposure.
5) What is the part number to order the Metallics 10-32 x 5/8 thread cutting screw?
Order it as Metallics PH223. That single manufacturer part number covers the 10-32 x 5/8 pan head Phillips Type 23 thread cutting screw in zinc chromate plated steel; there are no finish or length variations under it.
6) Is the PH223 a Phillips drive or a slotted screw?
Phillips drive, with a pan head. The pan head sits low and round-topped with a flat bearing surface, so it does not need a countersunk hole the way a flat head would.
How fast can I get the Metallics PH223 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics PH223 come with a warranty?
Absolutely. The Metallics PH223 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics PH223?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics PH223 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!