You may also like
Metallics JTEK16P 8 x 5/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK16P
8 x 5/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty
Additional Notes
Other sizes and quantities available by request | SAE J78 does not include...
Metallics
$50.31
$0.31
Metallics JTEK3P 10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK3P
10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty
Additional Notes
Other sizes and quantities available by request | SAE J78 does not include...
Metallics
$50.29
$0.29
Metallics JTEK34P 6 x 3/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK34P
6 x 3/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty
Features
#2 Drill Point
Pan Head with Phillips Drive
6 Diameter, 3/8" Length
Steel Zinc...
Metallics
$50.14
$0.14
Metallics JTEK3PV 10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK3PV
10 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty
Features
#2 Drill Point
Steel Zinc Material
Pan Head with Phillips Drive
10 Diameter, 3/4"...
Metallics
$50.26
$0.26
Metallics JTEK2PV 8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each
Model: MET-JTEK2PV
8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty
Additional Notes
Other sizes and quantities available by request | SAE J78 does not include...
Metallics
$50.19
$0.19
10 x 5/8 in. Pan Head Phillips Self-Drilling & Tapping Screws - #3 Drill Point- Steel Zinc - 100qty
Additional Notes
- Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.
Features
- Steel Zinc Material
- Pan Head with Phillips Drive
- #3 Drill Point
- 10 Diameter, 5/8" Length
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Country Of Origin:
- MUL
- Dimensional Standard:
- ASME B18.6.3-2010
- Division:
- Electrical H1
- Drill Point Size:
- #3
- Drive Type:
- Phillips
- Driver Size:
- #2
- Fastener Head Height:
- 0.122 - 0.133 in.
- Fastener Head Type:
- Pan
- Fastener Head Width:
- 0.357 - 0.373 in.
- Fastener Length:
- 8-May
- Finish:
- Zinc
- Hardness:
- Rockwell C32-40
- Language Code:
- EN
- Material:
- Steel Zinc
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Jar
- Panel Thickness:
- 0.035 - 0.110 IN
- Phillips Recess Diameter:
- 0.192
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Product Series:
- JTEK
- Recess Penetration Gaging Depth:
- 0.089 - 0.113
- Screw Point Type:
- Drill Point
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 16
- Thread Standard:
- SAE J78 - 2013
- Torsional Strength:
- 61 lb-in minimum
- Type:
- Type BSD Self-Drilling & Tapping Screw
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Type BSD Self-Drilling & Tapping Screw
- Type2:
- Type BSD Self-Drilling & Tapping Screw