Metallics JDS183V 10 x 1-1/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.20
$0.20
Metallics JDS183V 10 x 1-1/4 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 500qty

Metallics JDS183V 10 x 1-1/4 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JDS183V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.20
$0.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/4 in. 5/16 Indented Hex Head Slotted Sharp Point Tapping Screws - Steel Zinc - 500qty

  • Features

    • Steel Zinc Material
    • Hex 5/16 Head with slotted Drive
    • 10 Diameter, 1-1/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Hex/Slotted
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1/1/04
Hardness:
RockweII C28-38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Indent_Hex_Head_Slot_TS.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
4.3 lbs
Product Width:
4.5 in
Screw Point Type:
Gimlet Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JDS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JDS183V – Frequently Asked Questions

1) Can a Type A sharp point tapping screw like this be used in sheet metal without pre-drilling?
Yes. The JDS183V is a Type A tapping screw with a gimlet (sharp) point, which pierces and taps its own thread in thin sheet metal, so light gauge work does not need a pilot hole. In heavier stock, pre-drill, because a Type A point is made for thin material. Threads are 12 per inch to ASME B18.6.4.
2) How many screws come in a jar of Metallics JDS183V and can I buy fewer?
They ship in jars of 500, and 500 count is the order minimum, so that is the smallest quantity you can take. One jar weighs 4.3 lbs.
3) Is the #10 x 1-1/4 inch indented hex head screw long enough for mounting through strut or a box flange?
The screw is #10 diameter by 1-1/4 inch long, which leaves usable thread after passing through a single sheet or flange. Subtract your material thickness plus the head height of 0.105 to 0.12 inch to work out the engagement you get. For a thicker stack-up, step up in length rather than relying on partial thread.
4) How much torque can these tapping screws take before they snap?
Minimum torsional strength is 48 lb-in, with case hardness of Rockwell C28-38 on AISI 1016-1024 steel. That is plenty for driving into sheet metal with a nut driver, but it means a high torque impact driver will twist heads off. Drive with a clutch set low and stop when the washer seats.
5) Do these Metallics tapping screws meet Buy American requirements for a government or institutional job?
They are flagged as both ARRA compliant and Buy American compliant, which is what a public agency or institutional procurement office usually needs to see on a fastener submittal. Country of origin is listed as multiple.
6) Are these zinc plated screws suitable for outdoor or damp locations?
The JDS183V is zinc plated carbon steel. Zinc handles indoor and dry protected work, which is where most electrical sheet metal and enclosure fastening happens. For wet, coastal, or corrosive exposure, specify stainless instead; plated steel will eventually rust in standing moisture.
7) What dimensional standard do these indented hex head slotted screws conform to?
Head dimensions follow ASME B18.6.3-2010 and the threads follow ASME B18.6.4. That matters if a spec sheet calls out a standard hex washer head tapping screw, since the head and washer geometry will match the submittal table. Note that #9 diameter sizes in the JDS family are independent of ASME B18.6.4.
8) I need a different length or diameter in this same hex head slotted tapping screw. Is that available?
Yes. The Metallics JDS series covers other diameters and lengths in the same indented hex head, slotted, sharp point configuration, and other pack quantities can be requested. Model JDS183V is specifically the #10 x 1-1/4 inch with a 5/16 head.
How fast can I get the Metallics JDS183V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDS183V come with a warranty?
Absolutely. The Metallics JDS183V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDS183V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDS183V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!