Metallics JTEK18P 10 x 1-1/4 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.34
$0.34
Metallics JTEK18P 10 x 1-1/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

Metallics JTEK18P 10 x 1-1/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK18P
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.34
$0.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • Pan Head with Phillips Drive
    • #2 Drill Point
    • 10 Diameter, 1-1/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.87 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Torsional Strength:
61 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK18P – Frequently Asked Questions

1) Do I need to pre-drill a pilot hole for these #10 x 1-1/4 in. Metallics screws?
No pilot hole. The JTEK18P is a Type BSD self-drilling and tapping screw, meaning the point drills its own hole and the 16 threads-per-inch thread cuts its own thread in one pass. Just drive it straight into the panel with steady pressure.
2) Will a pan head screw sit flush, or do I need a flat head for a countersunk hole?
Pan head sits on top of the surface, it does not sink. The JTEK18P head measures 0.357 to 0.373 inch across and 0.122 to 0.133 inch high, so it leaves a low rounded boss above the panel with a broad bearing surface for clamping sheet metal, straps, or a device. If your hole is countersunk and you need the head below the surface, you want a flat or trim head screw instead.
3) Can I use these on a federally funded job with domestic content requirements?
No. The JTEK18P is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. For a project with domestic sourcing language in the contract you need a declared domestic fastener.
4) What size driver bit do I need for the JTEK18P pan head screws?
A #2 Phillips bit. The recess is a Phillips with a 0.192 inch recess diameter and the specified driver size is #2. A #1 bit will cam out and chew the recess, a #3 will not seat.
5) How many Metallics JTEK18P screws come in a jar and is there a minimum order?
They ship in a jar of 100, and 100 is the order minimum. The packed jar weighs 0.87 lbs.
6) Are these self-drilling screws tough enough to drive into steel without snapping the head off?
The JTEK18P is case hardened to Rockwell C32-40 with a minimum torsional strength of 61 lb-in. That is the spec that keeps the shank from twisting off while the point is cutting. Back off the clutch on an impact driver and let the point do the work rather than stalling it against the panel.
7) Is a zinc plated steel screw OK for outdoor or damp locations?
The JTEK18P is zinc plated steel, which is a dry indoor finish. It handles normal interior electrical, plumbing, and HVAC work, but for exterior, wet, corrosive, or coastal exposure specify a stainless self-drilling screw instead of zinc.
8) What standards do the Metallics JTEK screws meet?
Dimensions follow ASME B18.6.3-2010 and the thread and drill screw requirements follow SAE J78-2013. Note that SAE J78 does not cover #7 diameter drill screws, so if a spec calls out a #7 you will not find it under that standard.
How fast can I get the Metallics JTEK18P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK18P come with a warranty?
Absolutely. The Metallics JTEK18P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK18P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK18P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!