Metallics JTEK19PV 10 x 1-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.34
$0.34
Metallics JTEK19PV 10 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEK19PV 10 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK19PV
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.34
$0.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

  • Features

    • #2 Drill Point
    • Pan Head with Phillips Drive
    • Steel Zinc Material
    • 10 Diameter, 1-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/1/02
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Phillips Recess Diameter:
0.192
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
4.9 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.089 - 0.113
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
61 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK19PV – Frequently Asked Questions

1) What steel thickness will a #10 x 1-1/2 in. self-drilling screw with a #2 drill point actually drill through?
The #2 drill point on the Metallics JTEK19PV is rated for panel thickness of 0.035 to 0.110 in. That covers light gauge steel studs, track, and sheet metal. Thicker structural steel needs a larger drill point; going past 0.110 in. with a #2 point burns the point before it taps.
2) Do I need a pilot hole for Metallics JTEK19PV screws?
No. It's a Type BSD self-drilling and tapping screw, so the drill point cuts its own hole and the threads tap it in one pass. Drive it with a screw gun at moderate speed and keep steady pressure until the point breaks through.
3) What size driver bit do these Phillips pan head self-drilling screws take?
A #2 Phillips bit. The recess diameter is 0.192 in. with a gaging depth of 0.089 to 0.113 in., so a #2 seats fully. Using a #1 or a worn bit in that recess is how you cam out and strip the head.
4) How many Metallics JTEK19PV screws come in a jar, and can I buy fewer?
They ship in a jar with a 500 count minimum, so 500 pieces is the smallest order quantity. Other sizes and quantities are available by request.
5) Will a pan head screw sit flush, or do I need a flat head for strut and bracket work?
Pan head sits on top of the surface, not flush. Head width runs 0.357 to 0.373 in. with a height of 0.122 to 0.133 in., so it gives you bearing area to clamp a strap, clip, or plate against sheet steel. If the fastener has to sit flush in a countersunk hole, you want a flat head instead.
6) Are Metallics JTEK19PV screws Buy American and ARRA compliant for a government job?
Both the Buy American and ARRA compliance fields on the JTEK19PV are marked compliant. Country of origin is listed as multiple.
7) What standards do these #10 self-drilling tapping screws meet?
Dimensions follow ASME B18.6.3-2010 and the thread follows SAE J78 - 2013, UNC at 16 threads per inch. Hardness is Rockwell C32-40 with 61 lb-in minimum torsional strength. Note that SAE J78 does not cover #7 diameter drill screws, so that size has no thread spec behind it.
8) Can I use these zinc plated screws outdoors or in a damp location?
The JTEK19PV is zinc plated carbon steel, silver in appearance. Zinc plating is a dry indoor-duty coating, fine for interior stud framing, panel, and enclosure work. For exterior, wet, or corrosive locations, specify a stainless version instead.
How fast can I get the Metallics JTEK19PV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK19PV come with a warranty?
Absolutely. The Metallics JTEK19PV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK19PV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK19PV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!