Metallics JTS51 10 x 1-3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$0.39
Metallics JTS51 10 x 1-3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

Metallics JTS51 10 x 1-3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTS51
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$0.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1-3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • 10 Diameter, 1-3/4" Length
    • Steel Zinc Material
    • Pan head with Phillips Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
1/3/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Slot-Phil-Combo_Self_Tap.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.186 - 0.199
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.14 lbs
Product Width:
3 in
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JTS51 – Frequently Asked Questions

1) What kind of screw is the Metallics JTS51, and what material will it bite into?
The JTS51 is a Type A tapping screw, #10 diameter by 1-3/4 inch long, with a gimlet (sharp) point and 12 threads per inch. A Type A with a gimlet point is the coarse-thread sheet metal screw meant to be driven into thin sheet metal, sheet steel boxes and straps, and similar light-gauge material where the screw forms its own thread as it goes. It is not a machine screw, so it will not thread into a tapped 10-32 hole.
2) Can I use these screws on a Buy American or ARRA-funded job?
No. The JTS51 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. For federally funded work with domestic sourcing requirements you will need a fastener specified as compliant.
3) What size Phillips bit drives the Metallics JTS51 #10 pan head screw?
A #2 Phillips bit. The recess is 0.186 to 0.199 inch in diameter, 0.124 inch deep, with a 0.031 inch recess width, which is standard #2 geometry. Using a #1 will cam out and chew the recess; a #3 will not seat.
4) Will the Metallics JTS51 zinc tapping screw hold up outdoors or in a damp location?
The JTS51 is carbon steel with a zinc plating, which is an indoor and dry-location finish. Zinc plate gives light corrosion resistance for interior electrical, plumbing and HVAC work, but for wet, exterior or coastal exposure you want stainless steel or hot-dip galvanized fasteners instead.
5) How tough are these screws? Will they snap when driven with an impact driver?
Torsional strength is 48 lb-in minimum, with the screw case hardened to Rockwell C28 to 38 and made from AISI 1016 to 1024 steel. That is enough to form threads in sheet metal, but 48 lb-in is not much against an unregulated impact driver, so set the clutch low on a drill/driver and finish by feel rather than hammering it home.
6) Do the Metallics JTS51 screws meet a dimensional standard for spec work?
Yes. Head and recess dimensions are built to ASME B18.6.3-2013 and the thread conforms to ASME B18.6.4. Worth noting for anyone standardizing across a facility: dimensions for #9 diameter screws in the JTS family fall outside ASME B18.6.4, but the JTS51 is a #10, so it is covered.
7) How are the Metallics JTS51 tapping screws packaged, and what is the minimum order?
They ship in a jar of 100, and 100 is the minimum order quantity. Jar weight is 1.14 lbs. Other diameters, lengths and pack quantities in the JTS series are available by request.
How fast can I get the Metallics JTS51 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS51 come with a warranty?
Absolutely. The Metallics JTS51 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS51?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS51 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!