Metallics JTS27V 10 x 3/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics JTS27V 10 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 500qty

Metallics JTS27V 10 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTS27V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Pan head with Phillips Drive
    • 10 Diameter, 3/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.122 - 0.133 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.357 - 0.373 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Slot-Phil-Combo_Self_Tap.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.186 - 0.199
Phillips Recess Width:
0.031
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.95 lbs
Product Width:
3 in
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
12
Thread Standard:
ASME B18.6.4
Torsional Strength:
48 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTS
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics JTS27V – Frequently Asked Questions

1) What kind of screw is the Metallics JTS27V, and what material will it tap into?
The JTS27V is a #10 x 3/4 inch Type A tapping screw with a gimlet (sharp) point and 12 threads per inch. The sharp point and coarse Type A thread are made to cut their own thread in thin sheet metal, such as sheet metal boxes, straps, and light-gauge enclosures, with a pilot hole. It is steel with a zinc finish.
2) How many Metallics JTS27V screws come in a pack, and how are they packaged?
They ship in a 500 count jar, and 500 is the order minimum, so this is bought by the jar rather than by the piece. Jar weight is listed at 2.95 lbs.
3) Are these zinc tapping screws suitable for a Buy American or ARRA funded job?
The JTS27V is flagged compliant for both Buy American and ARRA. Country of origin is China, which is worth noting because some agency specs require domestic melt and manufacture rather than the broader compliance flag.
4) What size Phillips bit do I need for these #10 pan head tapping screws?
A #2 Phillips bit. The recess is 0.186 to 0.199 inch in diameter and 0.124 inch deep, which is standard #2 Phillips geometry, so a worn or undersized bit will cam out before the screw seats. Minimum torsional strength is 48 lb-in, so a driver set much above that will twist heads off.
5) Will a #10 pan head sit flat enough to mount a device or strap over it?
Pan head, so it sits on the surface rather than flush. Head width runs 0.357 to 0.373 inch and head height 0.122 to 0.133 inch, so budget about an eighth of an inch of standoff for anything stacked over the screw. If you need the fastener below the surface, a pan head is the wrong head style for that job.
6) What standards do these Metallics tapping screws conform to?
Head and recess dimensions follow ASME B18.6.3-2013; the thread conforms to ASME B18.6.4, the tapping screw standard. Steel is AISI 1016 to 1024, case hardened to Rockwell C28 to 38. Note that in the JTS family, #9 diameter dimensions are independent of ASME B18.6.4, though that does not affect this #10.
7) Can I use zinc plated steel tapping screws outdoors or in a wet location?
Zinc plating on carbon steel is an indoor and dry location finish. It handles handling and incidental moisture but will corrode in exterior, damp, or washdown service, so for outdoor enclosures or coastal work use a stainless tapping screw instead of the zinc plated JTS27V.
8) Do I need other lengths of this #10 Metallics tapping screw for thicker material?
The JTS27V is the 3/4 inch length. Other sizes and quantities in the JTS tapping screw line are available by request, so if you need a longer screw for stacked material or a shorter one to avoid breaking through, ask rather than forcing this length.
How fast can I get the Metallics JTS27V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS27V come with a warranty?
Absolutely. The Metallics JTS27V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS27V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS27V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!