Metallics TXV101Z 10 x 1 in. 5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.47
$0.47
Metallics TXV101Z 10 x 1 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - Steel Zinc - 100qty

Metallics TXV101Z 10 x 1 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TXV101Z
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.47
$0.47
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - Steel Zinc - 100qty

  • Additional Notes

    • Heavy Duty Steel-To-Steel Application|other sizes and quantities available by request

  • Features

    • #5 Drill Point
    • 10 Diameter, 1" Length
    • Made in the USA
    • Steel Zinc Material
    • 5/16 Hex Head with Hex Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#5
Drive Type:
Hex
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Hardness:
Rockwell C32-40
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Screws
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Fasteners
Product Subgroup:
Tapping Screws
Product Type:
Self-Drilling Screw
Type2:
Type BSD Heavy Duty Drill Screw
Series:
TXV
Product Finish:
Zinc
Product Details:
Type BSD Heavy Duty Drill Screw
Product Material:
Steel Zinc

Metallics TXV101Z – Frequently Asked Questions

1) What thickness of steel will a #10 x 1 in. self-drilling hex head screw with a #5 drill point go through?
The #5 drill point on the Metallics TXV101Z is the heavy-duty point in the self-drilling range, and the screw is built for steel-to-steel work rather than sheet-to-stud. With 16 threads per inch and a 1 inch length, you get roughly enough thread past the point to engage structural steel members, and the point drills its own hole so no pilot is needed. Hardness is Rockwell C32-40 and minimum torsional strength is 61 lb-in, which is what lets it cut heavier gauge without snapping the head off.
2) Do these Metallics screws meet Buy American or ARRA requirements for a government project?
No. The TXV101Z is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this part will not clear it and you need a certified domestic fastener.
3) What size driver or nut setter do I need for the Metallics TXV101Z drill screws?
A 5/16 inch hex nut setter. The head is a hex washer head measuring 0.305 to 0.312 in. across the flats and 0.34 in. across the corners, with head height of 0.105 to 0.12 in. Drive type is hex, so there is no bit to cam out, just a magnetic 5/16 setter in a screw gun.
4) Does the TXV101Z screw have a built-in washer, or do I need to add one?
It comes with an integral washer under the head, 0.384 to 0.414 in. outside diameter and 0.019 to 0.031 in. thick. That spreads the bearing load on the panel or strap you are fastening, so no separate washer is required for a normal steel-to-steel connection. It is not a sealing washer though, so if you need a weather seal on exterior metal, add a bonded neoprene washer.
5) Is the smallest quantity I can buy on these Metallics drill screws a box of 100?
Yes, the TXV101Z sells in a minimum of 100 count, supplied in a jar. Metallics lists other sizes and quantities in the TXV series by request, so if you need a longer screw or a bulk pack for a large steel job, that can be sourced.
6) Are these zinc drill screws OK for outdoor or damp locations?
The TXV101Z is steel with a zinc finish, which is a general-purpose corrosion coating suited to interior and protected applications. For sustained outdoor exposure, coastal air, or anywhere it will sit wet, zinc-plated carbon steel is the wrong call and you want a stainless or coated exterior-rated self-drilling screw instead.
7) What standards do the TXV101Z thread and head dimensions conform to?
Head and body dimensions follow ASME B18.6.3-2010 and the thread conforms to SAE J78-2013, the standard for steel self-drilling tapping screws. That matters on a spec'd job: if the drawing calls for a Type BSD self-drilling screw to SAE J78, this one answers it, and the 16 TPI thread is what that standard calls for at the #10 diameter.
How fast can I get the Metallics TXV101Z delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TXV101Z come with a warranty?
Absolutely. The Metallics TXV101Z is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TXV101Z?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TXV101Z from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!