12 x 1-1/4 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - Steel Zinc - 100qty
Features
- Steel Zinc Material
- #5 Drill Point
- 5/16 Hex Head with Hex Drive
- Made in the USA
- 12 Diameter, 1-1/4" Length
Additional Notes
- Heavy Duty Steel-To-Steel Application|other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Dimensional Standard:
- ASME B18.6.3-2010
- Division:
- Electrical H1
- Drill Point Size:
- #5
- Drive Type:
- Hex
- Fastener Head Height:
- 0.139 - 0.155 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.305 - 0.312 in.
- Fastener Length:
- 1/1/04
- Field Application:
- Construction, Heavy Duty
- Hardness:
- Rockwell C32-40
- Language Code:
- EN
- Material Standard:
- AISI 1016 - 1024
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Pack Type:
- Jar
- Panel Thickness:
- 0.110 - 0.210 IN
- Product Group:
- Screws
- Product Height:
- 2.7 in
- Product Length:
- 3 in
- Product Weight:
- 1.08 lbs
- Product Width:
- 3 in
- Screw Point Type:
- Drill Point
- Slot Depth:
- 0.077 - 0.093
- Slot Width:
- 0.056 - 0.067
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 14
- Thread Standard:
- SAE J78 - 2013
- Torsional Strength:
- 92 lb-in minimum
- Washer Od:
- 0.398 - 0.432 in.
- Washer Thickness:
- 0.022 - 0.039 IN
- Width Across Corners:
- 0.34
- Department:
- Fasteners
- Product Subgroup:
- Tapping Screws
- Product Type:
- Self-Drilling Screw
- Type2:
- Type BSD Heavy Duty Drill Screw
- Series:
- TXV
- Product Finish:
- Zinc
- Product Details:
- Type BSD Heavy Duty Drill Screw
- Product Material:
- Steel Zinc
Metallics TXV12114Z – Frequently Asked Questions
1) Is the TXV12114Z strong enough for steel-to-steel framing, or should I use a lighter self-drilling screw?
This is a Type BSD heavy duty drill screw, built for steel-to-steel work. It runs Rockwell C32-40 hardness with a minimum torsional strength of 92 lb-in, made from AISI 1016-1024 steel. For attaching strut, brackets, or hanger hardware into structural steel or heavy gauge framing, that is the range you want. For light gauge sheet metal or drywall track, a standard #2 or #3 point TEK screw drills faster and is less likely to overshoot the material.
2) Do Metallics TXV drill screws meet Buy American requirements for a federal or public project?
The TXV12114Z is flagged Buy American compliant and ARRA compliant, and the product is described as made in the USA. That is the pairing a government, school district, or federally funded job typically needs on the submittal.
3) How many screws come in a jar of Metallics TXV12114Z, and can I buy fewer?
They ship in a jar of 100 and 100 is the order minimum, so a jar is the smallest unit. The jar weighs 1.08 lbs. Metallics lists other sizes and quantities in the TXV line by request if 12 x 1-1/4 is not what your job calls for.
4) What standards do these 12-14 hex head self-drilling screws conform to?
Dimensions follow ASME B18.6.3-2010 and the threads follow SAE J78-2013, with the steel to AISI 1016-1024. If a spec sheet calls out an ASME B18.6.3 hex washer head drill screw, this one meets that dimensional callout.
5) What is the thread count on the Metallics 12 x 1-1/4 inch drill screw, and how much grip length do I actually get?
14 threads per inch on a #12 diameter shank, 1-1/4 inches long. Subtract the drill point and the thickness of the steel you are drilling through and what is left is your thread engagement, so on the heavy end of its range (0.210 inch panel) you still have the better part of an inch of thread working. That matters if you are stacking a bracket plus a plate.
6) Does the TXV12114Z have a sealing washer, and is the zinc finish OK outdoors?
There is an integral washer under the head, 0.398 to 0.432 inches outside diameter and 0.022 to 0.039 inches thick, which spreads the clamp load but is not a rubber sealing washer. The finish is zinc plated steel, which is a dry or protected interior finish. For roof decking, exterior cladding, or anywhere standing water is expected, specify a bonded neoprene washer screw or a stainless capped fastener instead.
How fast can I get the Metallics TXV12114Z delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TXV12114Z come with a warranty?
Absolutely. The Metallics TXV12114Z is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TXV12114Z?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TXV12114Z from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.