Metallics JTEKD7V 10 x 1 in. 5...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.27
$0.27
Metallics JTEKD7V 10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEKD7V 10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD7V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.27
$0.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 1 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

  • Features

    • 5/16 Indented Hex Head with Hex Drive
    • #2 Drill Point
    • Steel Zinc Material
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • 10 Diameter, 1" Length

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
1
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
3.75 lbs
Product Width:
3.5 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD7V – Frequently Asked Questions

1) What metal thickness can the Metallics JTEKD7V self-drilling screw drill through?
The JTEKD7V is rated for panel thickness of 0.035 to 0.110 inch. That covers typical sheet metal studs, strut, and light-gauge channel. Thicker steel than 0.110 inch needs a larger drill point than the #2 point on this screw.
2) Does the Metallics JTEKD7V come with a washer, or do I buy those separately?
The washer is integral to the head, so nothing extra to order. The washer outside diameter is 0.384 to 0.414 inch with a thickness of 0.019 to 0.031 inch, which spreads load over the sheet and helps seat flat on thin panel.
3) How many Metallics JTEKD7V screws come in a pack and what is the minimum order?
These ship in a jar of 500 pieces, and 500 is the order minimum. Plan quantities in multiples of that count for a job.
4) Are these zinc-plated screws OK for outdoor or damp locations?
The JTEKD7V is carbon steel with a zinc finish, which is a plated coating suited to dry interior and protected work. For sustained outdoor exposure or washdown areas, a stainless self-drilling screw is the better call. Head color is silver.
5) Will these screws snap when driven with an impact driver?
Minimum torsional strength is 61 lb-in, with case hardness of Rockwell C32-40 on AISI 1016-1024 steel. That is the published floor for driving torque, so back off impact settings or use a clutched screwgun rather than a high-torque impact to avoid twisting heads off in heavier gauge.
6) Do the Metallics JTEKD7V screws qualify for Buy American or ARRA federal projects?
Both the ARRA and Buy American compliance flags on the JTEKD7V are marked compliant. Country of origin is listed as multiple, so if a project requires a documented single source of manufacture, verify the origin on the lot you receive.
7) What is the thread pitch on the Metallics JTEKD7V #10 screw?
16 threads per inch, UNC, on a #10 diameter by 1 inch long screw. Threads conform to SAE J78-2013 and head dimensions to ASME B18.6.3-2010.
8) What is a Type BSD self-drilling screw used for on electrical work?
Type BSD means a drill point plus spaced thread for sheet metal, so one screw drills and taps in a single operation. On electrical jobs that is strut and channel attachment, mounting boxes and straps to metal studs, hanging raceway brackets, and panel and enclosure fastening in 0.035 to 0.110 inch material. Where the base metal is thicker or you need a removable, reusable thread, a machine screw into a tapped hole or a nut and bolt is the right choice instead.
How fast can I get the Metallics JTEKD7V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD7V come with a warranty?
Absolutely. The Metallics JTEKD7V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD7V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD7V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!