Metallics JFWP33SS 10 x 2-1/2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$53.53
$3.39
Metallics JFWP33SS 10 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP33SS 10 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP33SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$53.53
$3.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 10 Diameter, 2-1/2" Length
    • Stainless wood screws are usually supplied without additional finish
    • 18-8 Stainless Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
MUL
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.59 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP33SS – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWP33SS stainless wood screws?
The JFWP33SS ships as a jar of 100 screws, and 100 is the order minimum. Pack type is a jar, so you are buying by the jar rather than loose count.
2) What size Phillips bit do I need for Metallics JFWP wood screws?
Use a #3 Phillips driver. These are #10 diameter screws with a Phillips recess measuring 0.245 to 0.258 inch in diameter, which is why a #2 bit cams out and a #3 seats properly.
3) Will a flat head #10 wood screw sit flush in a countersunk hole?
Yes, the JFWP33SS is a flat head screw meant to be countersunk flush. Head width runs 0.34 to 0.385 inch with a head height of 0.116 inch, so a standard 82 degree countersink for a #10 flat head takes it in level with the surface.
4) Are Metallics JFWP33SS screws Buy American or ARRA compliant for a government job?
No. The JFWP33SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your spec carries a domestic sourcing requirement, this is not the fastener for that job.
5) Will 18-8 stainless wood screws hold up outdoors or in a damp mechanical room?
18-8 stainless is the material here, which is why these are used in wet and corrosive spots where plated steel rusts out. They are supplied bare, with no additional finish or coating over the stainless.
6) How far down the shank do these 2-1/2 inch wood screws thread?
Thread runs at 13 threads per inch with a tapered point. On this family, threading covers roughly the lower two thirds of the length past the first inch, so a 2-1/2 inch screw leaves unthreaded shank under the head. That unthreaded portion is what lets the screw clamp two pieces of wood tight instead of jacking them apart.
7) Do these stainless wood screws need a pilot hole?
Yes. These are tapered point wood screws, not self-drilling or self-tapping, so drill a pilot for the #10 shank. Stainless is softer than hardened steel and will twist off in dense or dry hardwood if you drive it dry, so pilot and wax it.
8) Do these wood screws meet a dimensional standard I can cite on a submittal?
Head, drive, and thread geometry conform to ASME B18.6.1, with the thread standard given as ASME B18.6.1-1997. That is the standard for wood screws, so the head and recess dimensions are interchangeable with any other B18.6.1 #10 flat head Phillips screw.
9) What are #10 x 2-1/2 inch stainless wood screws typically used for on an electrical or mechanical job?
Metallics lists these for the electrical, plumbing, heating, and air conditioning trades, which is their usual duty: anchoring straps, boxes, hangers, and equipment to wood studs, blocking, and joists. At 2-1/2 inches long they reach through a layer of finish or backing into framing.
How fast can I get the Metallics JFWP33SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP33SS come with a warranty?
Absolutely. The Metallics JFWP33SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP33SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP33SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!