Metallics JFWP23SS 8 x 2-1/2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Metallics JFWP23SS 8 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP23SS 8 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP23SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 2-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Features

    • Flat Head with Phillips Drive
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Stainless wood screws are usually supplied without additional finish
    • 18-8 Stainless Material
    • 8 Diameter, 2-1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
2/1/02
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.05 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP23SS – Frequently Asked Questions

1) Are these #8 stainless wood screws OK for outdoor or damp locations?
They are made from 18-8 stainless, which is the austenitic grade used where plain or zinc plated steel would rust, so exterior and damp interior work is the normal use. Stainless wood screws like these ship without any additional finish or coating. For direct saltwater exposure a 316 stainless fastener is the step up.
2) Are these stainless wood screws Buy American or ARRA compliant for a government job?
No. The JFWP23SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project carries a domestic sourcing requirement, these will not satisfy it.
3) What size driver bit do I need for the Metallics JFWP23SS wood screws?
A #2 Phillips bit drives the JFWP23SS. The recess is a Phillips type measuring 0.191 to 0.204 inch in diameter, 0.113 to 0.136 inch deep, with a 0.032 inch recess width, so a #2 seats fully. A #1 will cam out and a #3 will not bottom in the recess.
4) Do these wood screws thread all the way to the head?
No. The JFWP23SS is a 2-1/2 inch screw, and at that length the thread runs roughly two thirds of the shank with a plain shoulder under the head. That unthreaded shank is what lets the screw pull two boards tight together when the top piece is drilled for clearance. Only very short wood screws in this series run thread right up to the head.
5) What thread pitch and point do these Metallics #8 screws have, and can I drive them without a pilot hole?
Thread count is 15 per inch with a tapered point, which is the traditional wood screw profile. The taper lets it start in softwood, but in hardwood or near an edge a pilot hole is needed, since 18-8 stainless is softer than hardened steel and the heads will twist off before the screw seats.
6) Do these screws meet a recognized dimensional standard for spec work?
Yes. The JFWP23SS is built to ASME B18.6.1, with threads to ASME B18.6.1-1997, which is the standard governing wood screw head, recess and thread dimensions. That is the reference to cite on a submittal when a drawing calls for standard wood screws.
7) How are the Metallics JFWP23SS screws packaged and what is the minimum I can buy?
They come in a jar of 100, and 100 is the order minimum, so you buy by the jar rather than the piece. Jar weight is 1.05 lbs.
How fast can I get the Metallics JFWP23SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP23SS come with a warranty?
Absolutely. The Metallics JFWP23SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP23SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP23SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!