Metallics JFWP21SS 8 x 1-1/2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWP21SS 8 x 1-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

Metallics JFWP21SS 8 x 1-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFWP21SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. Flat Head Phillips Wood Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • 18-8 Stainless Material
    • Flat Head with Phillips Drive
    • Stainless wood screws are usually supplied without additional finish
    • 8 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.67 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Details:
Wood Screw
Product Material:
18-8 Stainless

Metallics JFWP21SS – Frequently Asked Questions

1) Will #8 x 1-1/2 in. stainless wood screws hold up outdoors or in damp locations?
The Metallics JFWP21SS is made of 18-8 stainless, so it handles exterior and damp-location work like deck framing, fence hardware, and outdoor boxes without a plated coating to wear off. Stainless wood screws like these ship with no additional finish, so the bare stainless is the corrosion protection.
2) Will these stainless wood screws satisfy a Buy American or ARRA requirement on a federal job?
No. The JFWP21SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your project has domestic-sourcing language in the spec, this screw will not clear it.
3) What driver bit do I need for the Metallics JFWP21SS wood screws?
A #2 Phillips bit. The head is a flat Phillips with a recess diameter of 0.191 to 0.204 in. and a recess depth of 0.113 to 0.136 in., so a #2 seats fully. A #1 will cam out and chew the recess on stainless.
4) How much of a 1-1/2 in. wood screw is actually threaded?
On the JFWP series, screws an inch and longer are threaded over about two thirds of the length, so a 1-1/2 in. screw gives you roughly an inch of thread with a plain shank under the head. That shank is what lets the screw clamp two boards together instead of jacking them apart, so drill the top piece as a clearance hole and let the thread bite only the bottom piece. Thread count is 15 per inch.
5) Are these traditional tapered-point wood screws or self-drilling type screws?
These are traditional tapered-point wood screws built to ASME B18.6.1, not a self-drilling or type-17 point. Plan on a pilot hole in hardwood and near board ends; stainless is softer than hardened steel screws and will twist off if you drive it dry into oak or maple.
6) How do the Metallics JFWP21SS screws come packaged, and is there a minimum order?
They come in a jar of 100 with a 100-piece minimum, so the smallest buy is one jar. Shipping weight on the jar is 0.67 lbs. Other sizes and quantities in the JFWP series can be had by request.
7) What are #8 x 1-1/2 in. stainless wood screws typically used for on the trade side?
Metallics lists this screw for the electrical, plumbing, heating, and air conditioning trades. In practice that is mounting boxes, straps, clamps, conduit supports, and small brackets to wood framing, where the 1-1/2 in. length gets good purchase into a stud through a device or bracket without punching through the far side of a 2x.
8) What dimensional standard do these Metallics wood screws meet for submittals?
Head, drive, and thread geometry follow ASME B18.6.1, with the thread specifically to ASME B18.6.1-1997. That is the standard a submittal reviewer looks for on an inch-series wood screw, so the recess and head dimensions will match any other B18.6.1 #8 flat head on the job.
How fast can I get the Metallics JFWP21SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP21SS come with a warranty?
Absolutely. The Metallics JFWP21SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP21SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP21SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!