Metallics QTEKD6 10 x 3/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.57
$0.57
Metallics QTEKD6 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 100qty

Metallics QTEKD6 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.57
$0.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 100qty

  • Features

    • Made in the USA
    • #2 Drill Point
    • 10 Diameter, 3/4" Length
    • 5/16 Head with Quadrive Drive
    • Domestic Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD6 – Frequently Asked Questions

1) Are Metallics QTEKD6 screws made in the USA for Buy American jobs?
Yes. The QTEKD6 is made in the USA from domestic steel, zinc plated, which is what institutional and government specs calling for domestic fasteners are looking for.
2) What size driver or socket do I need for the Metallics QTEKD6 screw?
The QTEKD6 has a 5/16 inch hex washer head with a Quadrive drive, so a 5/16 inch magnetic hex driver bit or nut setter runs it. The Quadrive feature also lets you drive it with a square (Robertson) bit if you cannot get a socket into a tight spot.
3) What thickness of material will a 3/4 inch #10 self-drilling screw hold?
At 3/4 inch overall length, the QTEKD6 is a #10 diameter screw meant for thin assemblies, metal-to-metal connections, strap and clip attachment, or fastening light sheet material to steel framing. Allow for the drill point and a few threads of engagement past the back of the steel, so the usable grip is well under the 3/4 inch length. Thicker stack-ups need a longer screw.
4) Are Metallics QTEKD6 screws okay for outdoor or damp locations?
These are zinc plated domestic steel. Zinc plating handles indoor and protected conditions well, but it is not a stainless or exterior-grade coating, so for direct weather exposure, coastal air, or wet locations you should move to a stainless or coated exterior fastener.
5) Can I use these screws for hanging electrical boxes and strut on metal framing?
That is the intended use. Metallics stocks the QTEKD6 as an electrical trade fastener, and a #10 self-drilling screw with a hex washer head is the standard choice for anchoring boxes, straps, clips, and conduit supports to steel studs or sheet metal. Confirm the steel gauge is within range of a #2 point before you commit to a long run.
6) What is the difference between a self-drilling screw like this and a self-tapping sheet metal screw?
The QTEKD6 carries a drill point, so it drills the pilot hole and forms the thread in a single operation. A plain self-tapping sheet metal screw has a sharp or blunt point and needs a pilot hole drilled first. If you are fastening into steel studs or sheet metal with no pre-drilling, the drill point version is what you want.
7) What is the part number for the Metallics 10 x 3/4 hex head self-drilling screw with a #2 point?
Order Metallics part number QTEKD6. That is the #10 diameter, 3/4 inch long self-drilling and tapping screw with a 5/16 inch Quadrive head and a #2 drill point in zinc plated domestic steel.
How fast can I get the Metallics QTEKD6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD6 come with a warranty?
Absolutely. The Metallics QTEKD6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!