Metallics QTEKD6V 10 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.50
$0.50
Metallics QTEKD6V 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 500qty

Metallics QTEKD6V 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD6V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.50
$0.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #2 Drill Point - Domestic Steel Zinc - 500qty

  • Features

    • #2 Drill Point
    • Domestic Steel Zinc Material
    • 5/16 Head with Quadrive Drive
    • 10 Diameter, 3/4" Length
    • Made in the USA

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD6V – Frequently Asked Questions

1) Will the Metallics QTEKD6V self-drilling screw go through sheet metal without a pilot hole?
Yes. The QTEKD6V is a self-drilling and self-tapping screw with a #2 drill point, so it drills its own hole and cuts its own thread in one pass through sheet metal. No pre-drilling and no separate tapping step. A #2 point is the common choice for light to medium gauge steel such as studs, strut, hat channel and enclosure panels.
2) What size and length is the Metallics QTEKD6V screw?
It is a #10 diameter screw, 3/4 inch long, with a 5/16 inch head. That length is short enough to fasten a single layer of strap, clip or bracket to metal stud or panel without the point protruding far behind the work, which matters in a wall cavity full of conductors.
3) What driver bit do I need for Metallics Quadrive self-drilling screws?
The QTEKD6V uses a Quadrive drive in a 5/16 inch head, so plan on the matching Quadrive bit in your screw gun rather than a Phillips. Have the right bit on the truck before you start the run; a mismatched bit on a self-drilling screw strips the recess under drilling torque.
4) Are these zinc plated screws OK for outdoor or damp locations?
The QTEKD6V is domestic steel with zinc plating, which is a mild indoor corrosion coating. It's fine for dry interior work such as electrical rooms, stud framing and panel mounting. For exterior, wet, or coastal exposure, specify a screw with a heavier coating or stainless material instead.
5) Are Metallics QTEKD6V screws made in the USA for a domestic-content job?
Yes, the QTEKD6V is made in the USA from domestic steel, which is what institutional and government jobs with domestic sourcing requirements on the submittal usually need from a fastener line item.
6) Can I use a self-drilling screw like this for electrical box and strap mounting to metal studs?
That's the intended use. The QTEKD6V is an electrical-trade fastener, and a #10 by 3/4 inch self-drilling screw is the standard way to attach boxes, straps, clips and small brackets to steel studs or sheet metal where you can't get behind the work to hold a nut. For heavier assemblies clamping through thicker steel, step up to a longer screw or a bolted connection.
7) What is the Metallics part number to order these #10 x 3/4 self-drilling screws?
Order by manufacturer part number QTEKD6V from Metallics. That number covers the #10 x 3/4 inch, 5/16 head Quadrive self-drilling and tapping screw with the #2 drill point in zinc plated domestic steel.
How fast can I get the Metallics QTEKD6V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD6V come with a warranty?
Absolutely. The Metallics QTEKD6V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD6V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD6V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!