Metallics QTEKD12V 10 x 3/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.50
$0.50
Metallics QTEKD12V 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #3 Drill Point - Domestic Steel Zinc - 500qty

Metallics QTEKD12V 10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #3 Drill Point - Domestic Steel Zinc - Each

(No reviews yet) Write a Review

Model: QTEKD12V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.50
$0.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 3/4 in. 5/16 Head Quadrive Self-Drilling & Tapping Screws - #3 Drill Point - Domestic Steel Zinc - 500qty

  • Features

    • Made in the USA
    • 5/16 Head with Quadrive Drive
    • Domestic Steel Zinc Material
    • #3 Drill Point
    • 10 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Division:
Electrical H1
Product Group:
Fasteners
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Domestic Steel Zinc

Metallics QTEKD12V – Frequently Asked Questions

1) Is the Metallics QTEKD12V made in the USA for Buy American jobs?
Yes. The QTEKD12V is made in the USA and the material is listed as domestic steel zinc, which is what a federal, state, or institutional spec calling for domestic fasteners is asking for.
2) What driver bit do I need for the Metallics QTEKD12V screw?
It has a 5/16 inch hex head with a Quadrive drive, so a 5/16 inch magnetic nut setter in a screw gun is the normal way to run it. The Quadrive head also takes a square drive bit, which is useful for overhead or tight work where a nut setter won't seat.
3) Are these hex head TEK screws okay for outdoor or damp electrical work?
The QTEKD12V is zinc plated domestic steel. Zinc plating handles indoor and dry interior conditions and occasional damp, but it is not a stainless or a long-term exterior coating. For a rooftop, coastal, or continuously wet location, specify a stainless or coated exterior fastener instead.
4) Do I need to pre-drill for these screws when fastening strut or conduit clamps to metal?
No pilot hole. The screw is self-drilling and self-tapping, so the drill point cuts the hole and the threads form in one pass through metal within the #3 point's range. Run it at full speed with steady pressure and back off once the head seats so you don't strip the tapped threads.
How fast can I get the Metallics QTEKD12V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QTEKD12V come with a warranty?
Absolutely. The Metallics QTEKD12V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QTEKD12V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics QTEKD12V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!