Metallics JTEKD17V 10 x 5/8 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JTEKD17V 10 x 5/8 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEKD17V 10 x 5/8 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD17V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 5/8 in. 5/16 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #2 Drill Point - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • #2 Drill Point
    • 5/16 Indented Hex Head with Hex Drive
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Steel Zinc Material
    • 10 Diameter, 5/8" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Hex
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.12 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
8-May
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.110 IN
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.85 lbs
Product Width:
3 in
Screw Point Type:
Drill Point
Slot Depth:
0.057 - 0.072
Slot Width:
0.05 - 0.06
Sub Division:
Electrical-E H2
Thread Per Inch:
16
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
61 lb-in minimum
Washer Od:
0.384 - 0.414 in.
Washer Thickness:
0.019 - 0.031 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD17V – Frequently Asked Questions

1) Do these Metallics self-drilling screws qualify for Buy American on a federal job?
Both Buy American and ARRA compliance are flagged on the JTEKD17V. Country of origin is listed as multiple, so if your specification requires a single named origin on the certification, request it per lot.
2) What standards do these #10 self-drilling tapping screws meet?
Dimensions follow ASME B18.6.3-2010 and threads follow SAE J78-2013. Material is AISI 1016 to 1024 steel case hardened to Rockwell C32-40, with a minimum torsional strength of 61 lb-in. Note that SAE J78 does not cover #7 diameter drill screws.
3) What driver do I need for the Metallics JTEKD17V self-drilling screw?
A 5/16 in hex driver. The head is an indented hex washer head measuring 0.305 to 0.312 in across the flats, 0.34 in across corners, with a head height of 0.105 to 0.12 in. Standard 5/16 magnetic nut setter in an impact or screw gun drives it.
4) Do these Metallics hex washer head screws need a separate washer, or is it built in?
The washer is integral to the head, so nothing extra to buy or hold. Washer outside diameter runs 0.384 to 0.414 in with a thickness of 0.019 to 0.031 in, which spreads the load on thin sheet and helps seat flat without dimpling the panel.
5) Can I order fewer than a jar of the JTEKD17V screws?
No. The JTEKD17V ships as a 500 count jar, and 500 is the order minimum. The jar weighs 2.85 lbs.
6) Is zinc plated steel good enough for these screws outdoors or in a damp mechanical room?
The JTEKD17V is zinc plated carbon steel with a silver head, which is a dry indoor or protected finish. For sustained exposure to weather, washdown, or coastal air, specify a stainless self-drilling screw instead. Worth knowing: minimum driving torques are the same for stainless and steel self-drill screws, so switching to stainless does not change the gun you use.
7) What thread pitch is a Metallics #10 self-drilling screw, and will it hold in sheet steel?
16 threads per inch, UNC, on a Type BSD self-drilling and tapping point. The screw drills its own hole and cuts the mating thread in one pass, so no pilot hole and no nut. Holding power comes from the sheet itself, which is why the 0.035 to 0.110 in panel range matters: too thin and you get few engaged threads.
8) How long does it take to drill with these self-drilling screws?
Drill time is 2.5 seconds through a 1 mm thick plate with the #2 point. For production runs on light gauge, that is the figure to plan labor against.
How fast can I get the Metallics JTEKD17V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD17V come with a warranty?
Absolutely. The Metallics JTEKD17V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD17V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD17V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!