Metallics JFWPB51 10 x 5/8 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWPB51 10 x 5/8 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB51 10 x 5/8 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB51
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
10 x 5/8 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Features

    • 10 Diameter, 5/8" Length
    • Flat Head with Phillips Drive
    • Brass Material

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.116 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.34 - 0.385 in.
Fastener Length:
8-May
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.123 - 0.146
Phillips Recess Diameter:
0.245 - 0.258
Phillips Recess Width:
0.034
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.5 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB51 – Frequently Asked Questions

1) How many screws come in a jar of Metallics JFWPB51 brass wood screws?
The JFWPB51 brass wood screws ship in a jar, with a minimum order of 100 count. So one buy gets you a 100-piece jar of #10 x 5/8 in. flat head Phillips brass screws.
2) What size Phillips driver do I need for these #10 brass wood screws?
Use a #3 Phillips bit. The recess runs 0.245 to 0.258 in. in diameter and 0.123 to 0.146 in. deep, so a #2 bit will sit shallow and cam out, especially in brass where the recess strips easily.
3) Is 5/8 in. long enough to hold a hinge or cover plate in solid wood?
At 5/8 in. it's a short screw, sized for thin stock, cover plates, escutcheons, light hinges and trim where you can't afford to blow through the back face. Thread runs the full length at this size, since the 2/3-thread rule only kicks in once length reaches 1 inch. For structural fastening into a frame, step up to a longer screw.
4) Why use brass wood screws instead of steel?
Brass is the choice when the screw is visible or when it has to match brass hardware, brass plates and brass trim, and for damp interior locations where a plain steel screw would rust and bleed. The tradeoff: brass is softer than steel, so drill a pilot hole and drive it slowly or the head will shear off.
5) Do these Metallics brass wood screws meet a dimensional standard for spec work?
Yes. The JFWPB51 is built to ASME B18.6.1, with threads to ASME B18.6.1-1997, at 13 threads per inch for the #10 diameter. That gives a submittal-ready reference if a drawing calls out standard wood screw dimensions.
6) Are these screws Buy American or ARRA compliant for a government job?
The JFWPB51 carries both ARRA and Buy American compliance codes on its record, with country of origin listed as China. Institutional buyers working a federally funded project should match those codes against their own contract language.
7) Can I get this brass wood screw in a different length or a bigger jar?
Other sizes and quantities of the Metallics JFWPB brass wood screw line are available by request. The JFWPB51 itself is the #10 x 5/8 in. flat head Phillips in a 100-count jar, and it's the single model on the JFWPB51 part number.
8) How much does a jar of 100 of these brass screws weigh for shipping or a stockroom bin?
A jar comes in at 0.5 lbs. Jar footprint is 3 in. by 3 in. with a height of 2.15 in., which drops into a standard small parts bin on a service van or MRO shelf.
How fast can I get the Metallics JFWPB51 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB51 come with a warranty?
Absolutely. The Metallics JFWPB51 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB51?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB51 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!