Metallics JFWPB07 8 x 5/8 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.49
$0.49
Metallics JFWPB07 8 x 5/8 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB07 8 x 5/8 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB07
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.49
$0.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 5/8 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • Brass Material
    • 8 Diameter, 5/8" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
8-May
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.34 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB07 – Frequently Asked Questions

1) How many Metallics JFWPB07 brass wood screws come in a jar, and can I buy fewer?
The JFWPB07 ships in a jar with a 100-count minimum order. That is the sell unit, so you are buying 100 screws at a time rather than loose pieces.
2) Will a #8 flat head brass screw sit flush in a countersunk hole?
Yes, if the countersink is cut for a standard #8 flat head. The head measures 0.292 to 0.332 inch across and 0.100 inch high, built to ASME B18.6.1, so it drops into any countersink cut to that standard and finishes flush with the surface.
3) What driver bit do I need for Metallics JFWPB07 wood screws?
A #2 Phillips bit. The recess is a Phillips drive measuring 0.191 to 0.204 inch in diameter and 0.113 to 0.136 inch deep, which is standard #2 territory. Brass is soft, so seat the bit fully and run it slow to avoid camming out and chewing the recess.
4) Should I use brass wood screws or steel for outdoor or damp locations?
Brass is the right call where corrosion or appearance matters, such as marine trim, exterior hardware, bath fixtures, or anywhere a plated steel screw would rust and bleed. The trade-off is strength: brass is softer than steel, so pilot drill, and do not use it where the joint carries real structural load. For framing or heavy pull-out duty, use a steel screw instead.
5) Do I need to drill a pilot hole for these brass wood screws?
Pilot drill them. At 15 threads per inch and 5/8 inch long in brass, driving dry into hardwood will twist the head off or strip the Phillips recess before the screw seats. Softwood with a thin pilot is fine; hardwood needs a proper pilot plus a clearance hole in the top piece.
6) How much of the 5/8 inch length is actually threaded?
Fully threaded. Metallics threads the JFWPB series full length up to 1 inch, and only screws longer than 1 inch get the 2/3 thread treatment. For a 5/8 inch screw that means thread engagement right up under the head, which matters when you are fastening thin trim or a hardware plate into a substrate.
7) Do these Metallics brass screws meet Buy American and ARRA requirements for a government job?
The JFWPB07 is flagged compliant for both Buy American and ARRA. Country of origin on the part is China. Procurement officers on federally funded work should weigh both of those against their contract language before specifying.
8) Are Metallics JFWPB07 screws dimensionally interchangeable with other #8 wood screws?
Yes. The thread is made to ASME B18.6.1-1997 and the overall screw to ASME B18.6.1, so a #8 x 5/8 flat head Phillips from this jar will interchange with any other screw built to the same standard. Pilot hole sizes and countersink tooling you already use for #8 wood screws carry straight over.
How fast can I get the Metallics JFWPB07 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB07 come with a warranty?
Absolutely. The Metallics JFWPB07 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB07?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB07 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!