You may also like
100 AL TP SPLICE SLEEVE 6IN
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Product Group:
- Wire & Cable Management
- Product Type:
- Aluminum Splice
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Sub Brand Label:
- Blackburn
- Surface Finishing:
- Tin Plated
- Type2:
- Wire or cable compression splice
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Material:
- Aluminum
Blackburn ASP1000 – Frequently Asked Questions
1) Is the Blackburn ASP1000 splice sleeve insulated, or do I have to insulate it myself?
The ASP1000 is a bare, uninsulated compression splice sleeve. Insulation material is listed as none, so the installer covers the joint after crimping using tape, a cold shrink, or a heat shrink tube rated for the circuit. Plan that material into the job, since nothing covering the sleeve ships with it.
2) Can I use the ASP1000 aluminum splice on copper conductors too?
Yes. The sleeve body is aluminum with a tin plated surface, which is the standard dual rated construction for joining aluminum to aluminum, copper to copper, or aluminum to copper. The tin plating is what keeps the aluminum barrel from reacting directly against copper strands at the joint.
3) Is the ASP1000 a crimp splice or a set screw connector?
It is a compression splice, meaning it gets crimped with a hydraulic or battery powered tool and the correct die for the barrel. There are no set screws and no bolts. If your crew does not carry a compression tool and die set, a mechanical set screw splice is the connector type to look at instead.
4) What voltage can a Blackburn ASP1000 splice sleeve be used on?
It carries a 35 kV voltage rating, so it covers low voltage building work as well as medium voltage feeders up to 35 kV. The rating applies to the connector itself; the final joint is only as good as the insulation and shielding system you rebuild over it.
5) Is the Blackburn ASP1000 a UL listed connector for inspected work?
The ASP1000 is covered under UL file E9809. That is the reference an inspector or a spec writer will want against an aluminum compression splice on a service or feeder splice.
6) Does a Blackburn ASP1000 come as a pair or is it sold as a single sleeve?
It is sold each, one sleeve per unit. Count one per splice point and order accordingly when you are making up a three phase set plus neutral.
7) Where is the Blackburn ASP1000 made?
Country of origin is Mexico. That is the detail a government or institutional buyer needs when a purchase order carries domestic sourcing or trade agreement language.
How fast can I get the Blackburn ASP1000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ASP1000 come with a warranty?
Absolutely. The Blackburn ASP1000 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ASP1000?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ASP1000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.