Metallics JFM9 12-24 x 1 in. F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.29
$0.29
Metallics JFM9 12-24 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM9 12-24 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM9
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.29
$0.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12-24 x 1 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Flat head with slotted Drive
    • Steel Zinc Material
    • Zinc yellow screws are popular in electronics applications.
    • 12-24 Diameter, 1" Length

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.112 - 0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.38 - 0.412 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.039 lbs
Product Width:
3 in
Slot Depth:
0.039 - 0.06
Slot Width:
0.056 - 0.067
Sub Division:
Electrical-E H2
Tensile Strength:
1450 lb minimum
Thread Per Inch:
24
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM9 – Frequently Asked Questions

1) Will these Metallics screws meet a Buy American or ARRA requirement on a federal job?
No. The JFM9 machine screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If the contract carries a domestic sourcing clause, these will not satisfy it.
2) Does the flat head on the Metallics JFM9 sit flush, and what countersink does it need?
Flat head, so it seats flush in a countersunk hole. The head measures 0.38 to 0.412 in. across and 0.112 to 0.132 in. high, so the countersink has to be at least that wide to bury the head. On unprepped sheet metal with only a drilled through-hole the head will stand proud by roughly the head height.
3) How many screws come in a JFM9 order, and how are they packed?
They ship in a jar, with a 100 piece minimum order. Total packed weight is 1.039 lbs. Plan the count against your job, since it is a bulk jar rather than a small card of a few pieces.
4) Is the zinc finish on these screws OK outdoors or in a damp location?
The JFM9 is carbon steel with a zinc plating, which is a mild indoor corrosion coating. It holds up in dry interior electrical, plumbing and HVAC work. For wet locations, exterior runs or corrosive environments, move to a stainless machine screw of the same 12-24 x 1 in. size.
5) How much material can a 1 inch 12-24 screw grip?
Fastener length is 1 in. On a flat head screw that length is measured from the top of the head, since the head sinks into the countersink, so the full inch is your grip plus thread engagement. Subtract your material thickness to see how much thread is left in the tapped hole or for a nut.
6) What dimensional standard do these flat head machine screws conform to?
Head geometry follows ASME B18.6.3-1998 and the threads follow ANSI/ASME B1.1. That matters if your submittal calls out a standard screw dimension, because the head width and countersink angle will match any other B18.6.3 flat head of the same size from another maker.
How fast can I get the Metallics JFM9 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM9 come with a warranty?
Absolutely. The Metallics JFM9 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM9?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM9 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!