Metallics JPMP5 12-24 x 1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$0.39
Metallics JPMP5 12-24 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP5 12-24 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP5
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$0.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12-24 x 1/2 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 12-24 Diameter, 1/2" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.139 - 0.151 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.407 - 0.425 in.
Fastener Length:
2-Jan
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.252
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.77 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.098 - 0.124
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
24
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP5 – Frequently Asked Questions

1) Will the Metallics JPMP5 12-24 screw thread into a standard electrical box or device bracket?
Yes. 12-24 is the standard machine screw thread used for electrical box mounting and device bracket holes, and the JPMP5 is a 12-24 thread at 24 threads per inch with a 1/2 inch length. The short 1/2 inch length suits tapped box ears and mounting brackets where you only need a few threads of engagement rather than a through-bolt.
2) Do these Metallics machine screws meet Buy American and ARRA requirements for a public project?
The JPMP5 is flagged both ARRA compliant and Buy American compliant in the product record. Country of origin is listed as multiple, so if your specification requires a single documented origin per lot, confirm the lot documentation with your submittal.
3) What size Phillips driver do I need for these 12-24 pan head machine screws?
A #3 Phillips bit. The recess diameter is 0.252 inch with a gaging depth of 0.098 to 0.124 inch, so a #2 bit will cam out and chew the recess under torque. Keep a #3 in the pouch if you are running these by drill.
4) How much room does the pan head take up on the surface?
The pan head measures 0.407 to 0.425 inch across and sits 0.139 to 0.151 inch proud of the surface. That is a broad bearing face, good for clamping sheet metal or a bracket slot without pulling through, but it is not a flush head, so it will stand off any plate or cover that needs to sit tight.
5) Are these zinc machine screws OK for outdoor or damp locations?
These are steel with a zinc finish, which handles dry indoor and protected locations. Zinc plating gives sacrificial corrosion protection but it is not stainless, so for wet locations, coastal exposure, or direct weather you want a stainless 12-24 pan head instead.
6) What dimensional standard do these pan head screws conform to?
Head and recess dimensions follow ASME B18.6.3-2010, and the steel is per AISI 1006 to 1022. That is the standard a spec writer looks for on a machine screw submittal, so the screw interchanges with any other B18.6.3 pan head of the same 12-24 x 1/2 size.
7) Is a 12-24 machine screw the same as a self-tapping sheet metal screw?
No. A machine screw like the JPMP5 has a uniform 24 tpi machine thread meant for a pre-tapped hole or a nut, with a blunt end. It will not cut its own thread in sheet metal. If the hole is not tapped, use a self-tapping or sheet metal screw instead.
8) How strong are these 12-24 steel screws?
Minimum tensile strength is 60,000 psi, with hardness in the Rockwell B70 to B100 range. That is standard low-carbon steel machine screw strength, fine for device mounting, brackets, covers, and general MRO fastening. For structural or high-load bolted joints you want a graded bolt, not a machine screw.
9) How are these sold, loose or in a package?
They come in a jar, with an order minimum of 100 count. That jar format is what makes them practical for a van or a shop drawer where you are pulling a handful at a time.
How fast can I get the Metallics JPMP5 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP5 come with a warranty?
Absolutely. The Metallics JPMP5 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP5?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP5 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!