Metallics TXV12200 12-24 x 2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$96.43
Metallics TXV12200 12-24 x 2 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - All-Weather - 50qty

Metallics TXV12200 12-24 x 2 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - All-Weather - Each

(No reviews yet) Write a Review

Model: TXV12200
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$96.43
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12-24 x 2 in. 5/16 Hex Head Heavy Duty Drill Screws - #5 Drill Point - All-Weather - 50qty

  • Features

    • 12-24 Diameter, 2" Length
    • #5 Drill Point
    • Made in the USA
    • 5/16 Hex Head with Hex Drive
    • All-Weather Coating

  • Additional Notes

    • Heavy Duty Steel-To-Steel Application|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
50 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#5
Drive Type:
Hex
Fastener Head Height:
0.139 - 0.155 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.305 - 0.312 in.
Fastener Length:
2
Field Application:
Construction, Heavy Duty
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Panel Thickness:
0.110 - 0.210 IN
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.93 lbs
Product Width:
3 in
Screw Point Type:
Drill Point
Slot Depth:
0.077 - 0.093
Slot Width:
0.056 - 0.067
Sub Division:
Electrical-E H2
Thread Per Inch:
24
Thread Standard:
SAE J78 - 2013
Torsional Strength:
92 lb-in minimum
Washer Od:
0.398 - 0.432 in.
Washer Thickness:
0.022 - 0.039 IN
Width Across Corners:
0.34
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Heavy Duty Drill Screw
Type2:
Type BSD Heavy Duty Drill Screw
Series:
TXV
Product Finish:
Zinc/All-Weather Coating
Product Details:
Type BSD Heavy Duty Drill Screw
Product Material:
All-Weather

Metallics TXV12200 – Frequently Asked Questions

1) What steel thickness will a 12-24 x 2 in. #5 drill point self-drilling screw actually drill through?
The Metallics TXV12200 is rated for a panel thickness of 0.110 to 0.210 in. That is the metal the #5 drill point is designed to cut and tap in one pass, so it suits heavy gauge steel framing, bar joist, and structural plate in that range. Thinner sheet metal does not need a #5 point, and material above 0.210 in. is outside what this point will drill.
2) Is this screw for steel-to-steel work or can I use it on wood?
Steel-to-steel. The TXV12200 is a Type BSD heavy duty drill screw with a machine thread at 24 threads per inch and a #5 drill point, built to drill and tap structural steel between 0.110 and 0.210 in. thick. For wood framing you want a wood or sheet metal screw with a coarse thread and a sharp point instead; this thread form will not hold reliably in wood.
3) Does this fastener meet Buy American and ARRA requirements for a public project?
Both are flagged compliant on the TXV12200, and the screw is made in the USA. It is built to ASME B18.6.3-2010 for dimensions and SAE J78-2013 for the thread, which are the standards a spec writer will be looking for on a submittal.
4) Will this drill screw hold up outdoors or in a damp mechanical room?
It carries a zinc/all-weather coating, which is what the "All-Weather" in the name refers to. That makes it usable for exterior and exposed steel-to-steel fastening where a plain uncoated drill screw would start rusting. For continuous saltwater exposure or a corrosive chemical environment, a stainless fastener is the better call.
5) How much torque can a Metallics TXV12200 take before it snaps while driving?
92 lb-in minimum torsional strength, with a case hardness of Rockwell C32-40 on AISI 1016-1024 steel. That is the figure that matters when you are running these with an impact or a high-torque screwgun into thick plate: back the clutch off below that and you will not shear heads off.
6) How are these 12-24 x 2 in. drill screws packaged and is there a minimum order?
They ship in a jar, with a minimum order of 100 jars. Other sizes and quantities are available by request, so if a 100-jar minimum does not fit the job, ask for the size and count you need.
7) Is 2 inches long enough for the connection I am making?
The TXV12200 has a 2 in. fastener length. Since it is designed to drill through 0.110 to 0.210 in. of steel, the remaining length is available to pass through whatever you are attaching, plus thread engagement in the base material. Add up your material stack first; if the total puts fewer than a few threads past the back of the base steel, step up to a longer screw.
8) What is the thread pitch on the TXV12200 and will it match a 12-24 tapped hole?
It is a 12-24 machine thread, 24 threads per inch, built to SAE J78-2013. It will run into an existing 12-24 tapped hole, though the point is a self-drilling type meant to cut its own hole in 0.110 to 0.210 in. steel rather than follow a pre-tapped one.
How fast can I get the Metallics TXV12200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TXV12200 come with a warranty?
Absolutely. The Metallics TXV12200 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TXV12200?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TXV12200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!