You may also like
1/2 BLK MI 45 STREET ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- MPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.5
- Size 2:
- 0.5
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Street Elbows
- Product Type:
- Street Elbow
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 0.2 lbs
ASC Engineered Solutions 310027206 – Frequently Asked Questions
1) Will this 1/2 inch black malleable iron 45 street ell thread onto standard 1/2 inch black pipe?
Yes. Both ends are 1/2 inch and the threads are cut to ASME B1.20.1, which is standard NPT taper thread, so it mates with any 1/2 inch NPT black steel pipe, nipple, or fitting. The female side takes a male pipe end; the male side threads into a female port such as a tee, coupling, or valve.
2) What pressure class is this malleable iron street elbow, and what standard does it meet?
It is a standard (STD) class fitting, dimensioned and pressure rated to ASME B16.3, the malleable iron threaded fittings standard. The iron itself is made to ASTM A-197. If your drawing calls for a 300 class or extra heavy fitting, this STD fitting is not the one to substitute.
3) Can I use a black malleable iron street elbow on a gas line?
Black malleable iron 45 street ells of this type are the usual fitting for black iron gas piping and other non-corrosive service such as steam, air, and hydronic heating. The black finish is uncoated, so keep it off potable water and out of wet or buried locations, where galvanized or another material is the right call. Local gas code governs the final approval on any fuel gas run.
4) Does this street elbow follow standard fitting dimensions so it drops into a spec'd layout?
It is dimensioned to ASME B16.3, so the center-to-end and thread engagement match any other B16.3 malleable iron 45 street ell in 1/2 inch. That means you can lay it out from the standard takeoff figures and swap it for another compliant brand without redoing the run.
5) Do I need thread sealant with this street ell?
Yes. The ends are NPT taper threads per ASME B1.20.1 and ship bare, so pipe dope or PTFE tape rated for the service (use a gas-rated sealant on fuel gas) goes on the male threads at assembly. No gasket or sealing washer is supplied with the fitting.
How fast can I get the ASC Engineered Solutions 310027206 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310027206 come with a warranty?
Absolutely. The ASC Engineered Solutions 310027206 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310027206?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310027206 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.