Metallics JFWPB44 12 x 3 in. F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$771.43
Metallics JFWPB44 12 x 3 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB44 12 x 3 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB44
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$771.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 3 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Brass Material
    • Flat Head with Phillips Drive
    • 12 Diameter, 3" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
3
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
2.99 lbs
Product Width:
3.5 in
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB44 – Frequently Asked Questions

1) How many screws come in a Metallics JFWPB44 jar, and can I buy fewer?
The JFWPB44 brass wood screws ship in a jar with an order minimum of 100 pieces, so a jar is the smallest buying unit. Other sizes and quantities are available by request.
2) What size Phillips driver do I need for Metallics JFWPB44 wood screws?
Use a #3 Phillips bit. The recess is 0.270 to 0.283 inch in diameter and 0.148 to 0.171 inch deep, so a #2 bit will sit shallow and cam out, which chews up a brass head fast. Set your driver on low torque.
3) Will solid brass screws hold in hardwood, or will they snap?
These are solid brass, not plated steel, and brass is softer. In oak, maple or any dense hardwood you must drill a full-depth pilot hole and drive slowly by hand or on a clutch set low, or the head will twist off. Brass is specified for corrosion resistance and appearance, so a common trick is to run a same-size steel screw first to cut the thread, back it out, then set the brass one.
4) Can I use these brass wood screws on a federally funded or Buy American job?
No. The JFWPB44 brass wood screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, you need a different fastener.
5) How much of a 3 inch Metallics wood screw is threaded?
On the JFWPB series the thread runs two thirds of the length, so a 3 inch screw gives you roughly 2 inches of thread with the balance as an unthreaded shank. Thread pitch is 11 threads per inch. That plain shank is what lets the top board pull tight against the bottom one, so size your pilot hole in the lower piece for the thread and clear the upper piece for the shank.
6) Are Metallics JFWPB44 screws made to a recognized dimensional standard?
Yes. Head, recess and thread dimensions follow ASME B18.6.1, with the thread specifically to ASME B18.6.1-1997. That matters if a spec or submittal calls out a standard wood screw rather than a proprietary fastener, and it means the head will seat in any standard wood screw countersink.
7) How much does a 100-count jar of JFWPB44 brass screws weigh for shipping?
A jar runs 2.99 lbs, with the jar measuring 3.5 by 3.5 by 5.75 inches. Useful if you are ordering by the case for a multi-site MRO stock room.
How fast can I get the Metallics JFWPB44 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB44 come with a warranty?
Absolutely. The Metallics JFWPB44 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB44?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB44 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!