Metallics JFWPB38 12 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWPB38 12 x 3/4 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB38 12 x 3/4 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB38
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
12 x 3/4 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

  • Features

    • Flat Head with Phillips Drive
    • 12 Diameter, 3/4" Length
    • Brass Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#3
Fastener Head Height:
0.132 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.389 - 0.438 in.
Fastener Length:
4-Mar
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.148 - 0.171
Phillips Recess Diameter:
0.270 - 0.283
Phillips Recess Width:
0.036
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.78 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
11
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB38 – Frequently Asked Questions

1) What size Phillips driver do I need for #12 brass flat head wood screws?
Use a #3 Phillips bit. The recess on the JFWPB38 runs 0.270 to 0.283 inch in diameter and 0.148 to 0.171 inch deep, so a #2 bit will sit shallow and cam out, which is how you strip a brass head. Brass is soft, so drive it slow and finish by hand if you can.
2) Will a #12 flat head screw sit flush in a countersunk plate or strap?
It will if the countersink matches a standard flat head. The JFWPB38 head measures 0.389 to 0.438 inch across with a 0.132 inch head height, built to the ASME B18.6.1 dimensional standard, so it seats flush in any 82 degree countersink cut for a #12 flat head.
3) Can I use these brass screws on a Buy American or ARRA funded project?
No. The JFWPB38 is not Buy American compliant and is not ARRA compliant, and its country of origin is listed as multiple. For a federally funded job with domestic sourcing requirements you need a domestically manufactured fastener instead.
4) How many Metallics JFWPB38 brass wood screws come in a jar, and can I buy just a few?
The JFWPB38 ships as a jar of 100 screws, and 100 is the order minimum. There is no loose or single-screw count on this item, so plan the job around full jars.
5) Why use brass wood screws instead of steel for electrical and plumbing work?
Brass is non-magnetic and corrosion resistant, which is why these are catalogued for electrical, plumbing, heating and air conditioning work. Common uses are mounting brass or bronze hardware where a steel screw would rust-stain the surround, and damp locations. The trade-off is strength: brass screws shear far more easily than steel, so pilot drill and do not overtorque.
6) How much of a 3/4 inch #12 wood screw is actually threaded?
All of it, effectively. The thread runs 11 per inch, and the Metallics JFWPB rule is that screws of 1 inch and over carry thread on two-thirds of the length, so a 3/4 inch screw is fully threaded to the head. That matters when you are fastening a thin plate to a stud, you get full bite from the first turn.
7) Do these Metallics brass screws meet a recognized fastener standard for submittals?
Yes. Dimensions follow ASME B18.6.1 and the thread is made to ASME B18.6.1-1997, the wood screw standard. That is the reference to put on a submittal when a spec calls for standard-dimension wood screws.
How fast can I get the Metallics JFWPB38 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB38 come with a warranty?
Absolutely. The Metallics JFWPB38 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB38?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB38 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!