You may also like
1/2IN 45D LT RELIEFCONN .50-.75 IRN
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Wiring Devices
- Product Type:
- 45 Degree Cord Connector
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Color:
- Metallic
- Product Material:
- Malleable Iron
Thomas & Betts 4922 – Frequently Asked Questions
1) What cord diameter range does the Thomas & Betts 4922 strain relief connector accept?
The 4922 is built for cords measuring .50 to .75 inch in outside diameter. Measure the jacket of the cord, not the individual conductors, and stay inside that window so the grip seals and holds properly. A cord under .50 inch will not be gripped reliably and needs a smaller range connector.
2) Why choose a 45 degree cord grip instead of a straight or 90 degree one?
The 4922 is a 45 degree angle connector. It routes the cord away from the enclosure on a diagonal, which is what you want where a straight connector would push the cord into a wall or ceiling and a full 90 would kink it against the box. Typical uses are pendant drops, machine feeds and vibrating equipment where you need a controlled bend radius at the entry point.
3) Is the Thomas & Betts 4922 metal or plastic?
Malleable iron, with a metallic finish. That makes it a better pick than a nylon cord grip on industrial equipment, in areas that see impact, and where you want the fitting itself to carry a bonding path back to the enclosure.
4) Does the 4922 provide strain relief, or is it just a cord entry fitting?
It is a strain relief connector, so it grips the cord jacket and transfers pulling force to the enclosure rather than to the terminations inside. That is the difference between it and a plain bushing or chase nipple, which only protect the cord from the edge of the knockout.
5) Can I use the Thomas & Betts 4922 to terminate flexible cord on portable or vibrating equipment?
That is the job it is built for. A 45 degree malleable iron cord grip sized for .50 to .75 inch cord holds flexible cord entering a motor connection box, a machine control panel or a portable enclosure, and takes the tug off the conductors when the equipment moves. Match the cord OD to the range first; that is the spec that decides whether it works.
How fast can I get the Thomas & Betts 4922 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 4922 come with a warranty?
Absolutely. The Thomas & Betts 4922 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 4922?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 4922 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.