Metallics JSHC14112 1/4-20 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC14112 1/4-20 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC14112

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Features

    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • Alloy Steel Black Material
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • 1/4-20 Diameter, 1-1/2" Length
    • Socket head with Hex Drive

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.244 - 0.25 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.365 - 0.375 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
16-Mar
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
2.31 lbs
Product Width:
3 in
Slot Depth:
0.12
Sub Division:
Electrical-E H2
Tensile Strength:
180000 psi minimum
Thread Per Inch:
20
Thread Type:
UN
Wall Thickness:
0.095
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC14112 – Frequently Asked Questions

1) How strong is the Metallics JSHC14112 socket head cap screw compared to a Grade 8 hex head bolt?
The JSHC14112 is an alloy steel socket head cap screw rated at 180,000 psi minimum tensile and 162,000 psi minimum yield, with a hardness of Rockwell C39. That is above what equivalent sizes of Grade 5 or Grade 8 hex head cap screws deliver, and because it is internally wrenched with a hex key it needs less surface area or counterbore clearance than a hex head of the same diameter.
2) What thread and size is the JSHC14112 cap screw, and will it thread into a 1/4-20 tapped hole?
Yes. It is a 1/4-20 UN thread, 20 threads per inch, 1-1/2 inches long, so it threads into any standard 1/4-20 tapped hole or 1/4-20 nut. No metric adapter or re-tap needed.
3) Will the head of this socket cap screw fit my existing counterbore?
Head diameter runs 0.365 to 0.375 inch and head height 0.244 to 0.25 inch, built to the ASME B18.3-2012 dimensional standard. So a counterbore drilled for a standard 1/4 inch socket head cap screw will take it. If your hole was bored for a 1/4 inch hex head bolt, you have more room than you need.
4) Can I use the Metallics JSHC14112 on a federally funded Buy American job?
No. The JSHC14112 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a job with domestic sourcing requirements you need a domestically produced fastener instead.
5) What size hex key do I need for the Metallics 1/4-20 socket head cap screw?
It takes a hex (Allen) key driver, with a socket depth of 0.12 inch. For a 1/4-20 socket head cap screw built to ASME B18.3, the standard socket is 3/16 inch across flats.
6) How many screws come in a jar of Metallics JSHC14112?
They ship 100 screws to a jar, and the jar is the order minimum, so 100 pieces is the smallest quantity. Total weight for the jar is 2.31 lbs.
How fast can I get the Metallics JSHC14112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC14112 come with a warranty?
Absolutely. The Metallics JSHC14112 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC14112?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC14112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!