Metallics JSHC141SS 1/4-20 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC141SS 1/4-20 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC141SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Socket head with Hex Drive
    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • 1/4-20 Diameter, 1" Length
    • 18-8 Stainless Material
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.244 - 0.25 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.365 - 0.375 in.
Fastener Length:
1
Hardness:
Rockwell B80
Hex Size:
16-Mar
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
1.66 lbs
Product Width:
3 in
Slot Depth:
0.12
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
20
Thread Type:
UNC
Wall Thickness:
0.095
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC141SS – Frequently Asked Questions

1) Is the Metallics JSHC141SS 1/4-20 socket cap screw sold individually or by the jar?
It ships in a jar of 100. The order minimum on the JSHC141SS is 100 count, so a single screw is not an orderable quantity. Plan the count for your job accordingly if you only need a handful.
2) Will a 1/4-20 socket head cap screw clear a 3/8 inch counterbore?
Head width on this 1/4-20 socket cap screw runs 0.365 to 0.375 in., and head height is 0.244 to 0.25 in. That is a nominal 3/8 head on a standard 1/4 inch socket screw, so a counterbore cut for a 3/8 head will take it, but with essentially zero slop at the top of the tolerance. If you need guaranteed clearance, bore slightly oversize.
3) What thread does the JSHC141SS take, and will it run into a standard 1/4-20 tapped hole?
Coarse UNC thread at 20 threads per inch in 1/4 inch diameter, 1 inch long. It threads into any standard 1/4-20 UNC tapped hole or nut. Fine thread (1/4-28) hardware will not accept it.
4) Are these stainless cap screws strong enough for structural bolting?
No. 18-8 stainless socket cap screws like this one are rated at 80,000 psi minimum tensile and 30,000 psi minimum yield, with a hardness of Rockwell B80. That is corrosion-resistant general fastening, not high-strength work. For structural or high-preload joints you want an alloy steel socket cap screw, which runs several times this tensile value.
5) Can I use these outdoors or in a damp mechanical room?
18-8 stainless is the right pick for wet, humid, and washdown locations, and it holds its mechanical properties above ambient temperature, which is why it gets specified in rooftop and boiler room work. In chloride-heavy coastal or pool environments, 316 stainless is the better material.
6) Does the Metallics JSHC141SS meet Buy American and ARRA requirements for a government or institutional job?
The JSHC141SS is flagged compliant for both Buy American and ARRA. Country of origin is listed as multiple, so if your contract requires a single named origin on the submittal, confirm the origin of the specific lot you receive.
7) What dimensional standard do these socket head cap screws conform to?
ASME B18.3-2012, the socket cap screw standard. If your drawing or spec section calls out B18.3 hex socket drive cap screws, this 1/4-20 x 1 in. screw satisfies that dimensional callout.
8) Will stainless socket screws gall when I tighten them into a stainless tapped hole?
18-8 stainless running against stainless is prone to galling and thread seizure under torque. Use an anti-seize or a nickel-based lubricant on the threads and bring them up slowly rather than hammering them with an impact driver. Yield here is 30,000 psi minimum, so there is not much margin to overtighten before you stretch the screw.
9) Do I need a hex key or a wrench to drive these?
Hex key. It is a socket head with an internal hex drive, so there are no flats to grip with a wrench. That is the advantage in tight panel work and recessed counterbores where a wrench will not swing.
How fast can I get the Metallics JSHC141SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC141SS come with a warranty?
Absolutely. The Metallics JSHC141SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC141SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC141SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!