Metallics JSHC1412SS 1/4-20 x ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Image coming soon

Metallics JSHC1412SS 1/4-20 x 1/2 in. Socket Head Hex Cap Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSHC1412SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1/2 in. Socket Head Hex Cap Screws - 18-8 Stainless - 100qty

  • Features

    • They retain thier mechanical ard performance capabilities at higher than ambient temperatures.
    • 1/4-20 Diameter, 1/2" Length
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • 18-8 Stainless Material
    • Socket head with Hex Drive

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.244 - 0.25 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.365 - 0.375 in.
Fastener Length:
2-Jan
Hardness:
Rockwell B80
Hex Size:
16-Mar
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Stainless.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.14 lbs
Product Width:
3 in
Slot Depth:
0.12
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
20
Thread Type:
UNC
Wall Thickness:
0.095
Yield Strength:
30000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Details:
Cap Screw
Product Material:
18-8 Stainless

Metallics JSHC1412SS – Frequently Asked Questions

1) What thread does the Metallics JSHC1412SS socket head cap screw take, and will it go into a 1/4-20 tapped hole?
It's a 1/4-20 UNC thread, 20 threads per inch, so it threads straight into any standard 1/4-20 tapped hole or nut. Usable length is 1/2 inch, which means your total grip (material plus washers) plus thread engagement has to live inside that half inch. Deeper stack, step up to a longer screw in the same thread.
2) Will the head of this 1/4-20 socket cap screw fit into a counterbore?
Head diameter runs 0.365 to 0.375 inch and head height 0.244 to 0.25 inch. A counterbore cut for a standard 1/4 inch socket head cap screw takes it, and at a quarter inch of head height you can bury it flush in a 1/4 inch deep bore. The screw is made to ASME B18.3-2012, which is the dimensional standard a machined counterbore is normally cut from.
3) Are these stainless cap screws OK for outdoor or wet locations?
They're 18-8 stainless, an austenitic chrome-nickel grade, so they handle outdoor, damp and washdown exposure without plating to wear off. They also hold their mechanical properties above ambient temperature, which matters in attic runs, boiler rooms and near heat-producing equipment. For heavy chloride exposure (coastal or pool chemical rooms), 316 is the better material.
4) Will these Metallics stainless cap screws satisfy a Buy American requirement on a federal job?
Metallics flags the JSHC1412SS as both Buy American compliant and ARRA compliant, which is what a government, school district or federally funded project submittal normally asks for on fasteners. Country of origin is listed as multiple.
5) How strong is an 18-8 stainless socket cap screw compared to an alloy steel one?
This one is rated 80,000 psi minimum tensile and 30,000 psi minimum yield, with a hardness of Rockwell B80. That is a corrosion-resistant fastener, not a high-strength one. Black alloy socket head cap screws are rated far higher in tensile but will rust unplated. If the joint is structural or highly loaded, size up or go alloy; if it's equipment mounting, strut, enclosures or anything exposed to weather, stainless is the right call.
6) Do I have to buy a full jar of these 1/4-20 cap screws or can I get a few?
They ship in a jar, with an order minimum of 100 count. So the smallest purchase is a 100-piece jar rather than loose pieces. Other sizes and quantities can be had by request.
7) What's the weight of a 100-count jar of 1/4-20 x 1/2 stainless socket cap screws for shipping?
A jar comes in at 1.14 lbs, with the container measuring 3 x 3 x 2.15 inches. Useful if you're consolidating a fastener order onto a job-site shipment or stocking a service van bin.
How fast can I get the Metallics JSHC1412SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC1412SS come with a warranty?
Absolutely. The Metallics JSHC1412SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC1412SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC1412SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!