Metallics JBSC1412 1/4-20 x 1/...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.39
$0.39
Metallics JBSC1412 1/4-20 x 1/2 in. Socket Button Head Hex Cap Screws - Alloy Steel Black - 100qty

Metallics JBSC1412 1/4-20 x 1/2 in. Socket Button Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JBSC1412
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.39
$0.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 1/2 in. Socket Button Head Hex Cap Screws - Alloy Steel Black - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | 8% minimum (applies to machined specimens of lengths at least 4D where D equals the nominal diameler of the screw) | 35% minimum (applies to machined specimens) | Screws must be of a length equal to or greater than 3 diameters to be subject to tensile testing | Class 3A threads over 1" diameter screws are Class 2A threads

  • Features

    • The are not recommended for critical, high-strength applications.
    • Screws are supplied plain.
    • Button Socket head with Hex Drive
    • Alloy Steel Black Material
    • 1/4-20 Diameter, 1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.122 - 0.132 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.419 - 0.437 in.
Fastener Length:
2-Jan
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39-44
Hex Size:
May-32
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Button_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.07 lbs
Product Width:
3 in
Slot Depth:
0.087
Sub Division:
Electrical-E H2
Tensile Strength:
4430 lb minimum
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UN
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
BSC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JBSC1412 – Frequently Asked Questions

1) Is the Metallics JBSC1412 button head cap screw sold individually or only by the jar?
The JBSC1412 ships in a jar, and the order minimum is 100 pieces. So it is a 100-count jar buy rather than a loose single-piece pick. Other sizes and quantities can be requested.
2) What thread does a 1/4-20 socket button head cap screw take, and will it go into a standard 1/4-20 tapped hole?
It is a 1/4-20 UN thread at 20 threads per inch, made to ANSI/ASME B1.1. That mates with any standard 1/4-20 tapped hole or 1/4-20 nut. Thread length is the full 1/2 in. shank length.
3) Do these Metallics cap screws qualify for a Buy American or ARRA-funded project?
No. The JBSC1412 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. On a federally funded job with domestic sourcing requirements, you will need a domestically produced fastener.
4) Are these screws plated or coated for outdoor and wet-location use?
They are supplied plain, in black alloy steel with a black finish, so there is no plating or applied corrosion protection. Keep them to dry indoor work such as panel, gear, and mechanical room fastening. For damp or exterior locations, choose a zinc-plated or stainless cap screw.
5) What dimensional standard do these socket button head screws meet, so I can confirm they match a submittal callout?
Head and body geometry is made to ASME B18.3-2012, the socket cap screw dimensional standard, and threads to ANSI/ASME B1.1. If the drawing calls out a B18.3 button head socket screw in 1/4-20, this answers the callout. Note that Class 3A threads apply here; over 1 in. diameter screws move to Class 2A.
6) Why pick a button head socket screw over a standard hex head bolt for electrical enclosure work?
The button head sits low and wide, 0.122 to 0.132 in. tall over a 0.419 to 0.437 in. head, and it drives with a hex key instead of a wrench. That matters where a socket or box wrench will not swing, inside enclosures, gear trays, and tight channel. Metallics lists the application as the electrical, plumbing, heating and air conditioning trades. If you need wrench torque or a seating surface for a washer face, use a hex cap screw instead.
7) Is 4430 lb tensile a tested value I can rely on for this short 1/2 in. screw?
The 4430 lb minimum tensile figure applies to screws long enough to be pulled in a test fixture. Metallics notes that screws must be at least 3 diameters long to be subject to tensile testing, and the elongation figure applies to machined specimens of at least 4 diameters. At 1/4-20 x 1/2 in., the screw is 2 diameters long, so treat the strength number as a material property of the alloy rather than a tested result on this length.
How fast can I get the Metallics JBSC1412 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBSC1412 come with a warranty?
Absolutely. The Metallics JBSC1412 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBSC1412?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBSC1412 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!