Metallics JFM104SS 1/4-20 x 2 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Metallics JFM104SS 1/4-20 x 2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JFM104SS 1/4-20 x 2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JFM104SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 2 in. Flat Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance, in food processing machinery and refrigeration equipment.
    • Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
    • Flat head with slotted Drive
    • 1/4-20 Diameter, 2" Length
    • 18-8 Stainless Material

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.131 - 0.153 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.442 - 0.477 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
1.38 lbs
Product Width:
3 in
Slot Depth:
0.046 - 0.07
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Tensile Strength:
1900 lb minimum
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JFM104SS – Frequently Asked Questions

1) Will a 1/4-20 machine screw thread into a standard 1/4-20 tapped hole or nut?
Yes. The Metallics JFM104SS is a 1/4-20 UNC thread at 20 threads per inch, made to ANSI/ASME B1.1, so it mates with any standard 1/4-20 coarse tapped hole, nut, or strut channel nut.
2) Will these screws meet a Buy American or ARRA requirement on a federal job?
No. The JFM104SS is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, this part will not satisfy it.
3) How much material thickness can a 2 inch long 1/4-20 flat head screw go through?
The 2 in. length is measured from the top of the flat head to the point, because flat heads are countersunk. Subtract the thickness of the tapped part or the nut stack from that 2 in. to work out your usable grip.
4) Is 18-8 stainless the right choice for damp or washdown areas, or should I use plated steel?
18-8 stainless is what you want where general atmospheric corrosion resistance matters, including food processing machinery and refrigeration equipment, and it holds strength better than steel at elevated operating temperatures. Plated steel is fine indoors and dry, but it will rust at the head in a washdown bay or outdoors.
5) Does a machine screw like this self-tap, or do I need to drill and tap first?
It does not self-tap. A machine screw has a blunt, uniform 1/4-20 UNC thread and needs a pre-tapped hole, a nut, or a threaded channel insert. For sheet metal with no existing threads you want a self-drilling or tapping screw instead.
6) Do these Metallics machine screws come loose or in a pack, and what is the minimum order?
JFM104SS ships as a jar, with an order minimum of 100 in jar units. Plan the count per jar into your job order rather than buying singles.
7) Are these machine screws suitable for mounting electrical boxes, panels, and HVAC equipment?
That is the intended use. The FM and FMP series is listed for the electrical, plumbing, heating and air conditioning trades, and a 1/4-20 x 2 in. flat head is a common size for panel, enclosure, and equipment mounting where the head has to sit flush.
How fast can I get the Metallics JFM104SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM104SS come with a warranty?
Absolutely. The Metallics JFM104SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM104SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM104SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!