Metallics JRM134SLT 1/4-20 x 6...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRM134SLT 1/4-20 x 6 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JRM134SLT 1/4-20 x 6 in. Round Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRM134SLT
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 6 in. Round Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • 1/4-20 Diameter, 6" Length
    • Round head with slotted Drive

  • Additional Notes

    • In 1985, Metallics was the first fastener company in America to offer a full line of Combo’s! | Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.16 - 0.175 in.
Fastener Head Type:
Round
Fastener Head Width:
0.443 - 0.472 in.
Fastener Length:
6
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
6.52 lbs
Product Width:
4.5 in
Recess Penetration Gaging Depth:
0.104 - 0.130
Slot Depth:
0.082 - 0.109
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
20
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRM
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JRM134SLT – Frequently Asked Questions

1) Will a round head slotted screw sit flush in a countersunk hole?
No. The JRM134SLT has a round head that sits proud of the surface, roughly 0.16 to 0.175 inch tall and 0.443 to 0.472 inch across. If your plate or enclosure is countersunk for a flush finish, you need a flat head screw instead. The round head does give you a wider bearing surface against sheet metal, which is why it's common on device and enclosure work.
2) Can I use these screws outdoors or in a damp location?
The JRM134SLT is zinc plated steel. Zinc plating handles indoor and dry protected locations fine, but it's a sacrificial coating and will corrode in wet, washdown, coastal, or buried conditions. For those, specify a stainless machine screw in the same 1/4-20 x 6 size.
3) How many Metallics JRM134SLT screws come in a package?
They ship 100 to a jar, and 100 count is the order minimum. So the smallest buy is a full jar of 100 pieces, not a single screw.
4) How strong are these 1/4-20 machine screws, and are they hardened?
Minimum tensile strength is 60,000 psi, with hardness in the Rockwell B70 to B100 range. The steel is AISI 1006 to 1022, a low carbon grade, so this is a standard unhardened machine screw, not a high strength cap screw. For structural or high clamp load joints, step up to a Grade 5 or Grade 8 hex bolt instead.
5) Are Metallics JRM screws Buy American or ARRA compliant for a government job?
The JRM134SLT carries a compliance flag of C for both Buy American and ARRA. Country of origin is China. On a federally funded project where domestic origin is a hard requirement, verify against your contract's specific clause before you submit it.
6) Do these machine screws come with nuts or washers?
No. The JRM134SLT is sold as screws only, 100 to a jar. Order your 1/4-20 nuts, lock washers, or flat washers separately to complete the assembly.
7) What does a jar of 100 of these 6 inch machine screws weigh for shipping?
The packaged jar runs 6.52 lbs. Useful if you're ordering several counts at once for a job cart or staging a van stock.
How fast can I get the Metallics JRM134SLT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRM134SLT come with a warranty?
Absolutely. The Metallics JRM134SLT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRM134SLT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRM134SLT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!