Metallics JTEKD10V 14 x 1 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.51
$0.51
Metallics JTEKD10V 14 x 1 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 500qty

Metallics JTEKD10V 14 x 1 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD10V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.51
$0.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 1 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • #3 Drill Point
    • Steel Zinc Material
    • 14 Diameter, 1" Length
    • 3/8 Indented Hex Head with Hex Drive
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#3
Drive Type:
Hex
Fastener Head Color:
Silver
Fastener Head Height:
0.172 - 0.19 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.367 - 0.375 in.
Fastener Length:
1
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
7.05 lbs
Product Width:
4.5 in
Screw Point Type:
Drill Point
Slot Depth:
0.083 - 0.101
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
14
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Washer Od:
0.480 - 0.520 in.
Washer Thickness:
0.030 - 0.050 IN
Width Across Corners:
0.409
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD10V – Frequently Asked Questions

1) What thickness of steel will a #3 drill point self-drilling screw go through?
The Metallics JTEKD10V carries a #3 drill point, which is the heavier of the common light-gauge points and is intended for structural light-gauge steel rather than thin sheet. The screw is 1 inch long overall, so the usable thread depth after the drill point and the material you are fastening through limits it. For 1 mm thick plate the drill time is 2.5 seconds.
2) Will a 14 x 1 inch self-drilling screw hold in an existing 1/4-20 tapped hole?
No. The JTEKD10V is a #14 diameter self-drilling, self-tapping screw with 14 threads per inch in UNC form, and it cuts its own hole and thread. It is not a machine screw and will not thread reliably into an already tapped 1/4-20 hole. Drive it into undrilled steel and let the #3 point do the work.
3) Do these screws meet Buy American and ARRA requirements for a government or school project?
The JTEKD10V is flagged compliant for both ARRA and Buy American, with country of origin listed as multiple. For a federally funded job, cite the compliance flags on the submittal and request the mill documentation for the specific lot you receive.
4) What driver or socket do I need for these indented hex head screws?
A 3/8 inch hex driver. The head is an indented hex measuring 0.367 to 0.375 inch across the flats, 0.409 across the corners, so a standard 3/8 socket or magnetic hex bit drives it. Head height runs 0.172 to 0.190 inch.
5) Is the washer built into the screw or a separate loose washer?
It is an integral washer under the indented hex head, not a loose piece. Outside diameter is 0.480 to 0.520 inch with a washer thickness of 0.030 to 0.050 inch, which spreads the bearing load and seats flat against strut, channel, or sheet without you having to stock a separate washer.
6) Are these zinc screws suitable for outdoor or wet locations?
These are carbon steel with a zinc finish, head color silver. Zinc plating is a dry-location or sheltered finish. For sustained exterior exposure, roof work, or washdown areas, step up to a stainless or coated exterior-rated self-drilling screw instead.
7) How are these Metallics self-drilling screws packaged and what is the minimum I can order?
They ship in a jar, with an order minimum of 500 count. Package weight is 7.05 lbs and the container measures 4.5 in. by 4.5 in. by 7.25 in., so one jar covers a sizeable run of strut, hanger, or enclosure mounting without reordering.
8) What standards do these Type BSD self-drilling screws conform to?
Dimensions follow ASME B18.6.3-2010 and the thread conforms to SAE J78-2013. The steel is AISI 1016-1024 case hardened to Rockwell C32-40 on the core scale. Worth noting for spec writers: SAE J78 does not cover #7 diameter drill screws, so a #7 callout cannot be held to that thread standard.
9) Can I use a stainless self-drilling screw at the same torque setting as these steel ones?
Yes on torque. Minimum torques are the same for stainless and steel self-drilling screws, so a driver set up for the zinc-plated JTEKD10V transfers across. The difference is corrosion resistance, not driving behavior.
How fast can I get the Metallics JTEKD10V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD10V come with a warranty?
Absolutely. The Metallics JTEKD10V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD10V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD10V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!