Metallics JTEKD9M 14 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.44
$0.44
Metallics JTEKD9M 14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 1000qty

Metallics JTEKD9M 14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEKD9M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.44
$0.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 1000qty

  • Features

    • #3 Drill Point
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • 3/8 Indented Hex Head with Hex Drive
    • 14 Diameter, 3/4" Length
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#3
Drive Type:
Hex
Fastener Head Color:
Silver
Fastener Head Height:
0.172 - 0.19 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.367 - 0.375 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
12.21 lbs
Product Width:
4.5 in
Screw Point Type:
Drill Point
Slot Depth:
0.083 - 0.101
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
14
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Washer Od:
0.480 - 0.520 in.
Washer Thickness:
0.030 - 0.050 IN
Width Across Corners:
0.409
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEKD9M – Frequently Asked Questions

1) Do I need to pre-drill for the Metallics JTEKD9M self-drilling screws?
No pilot hole needed. The JTEKD9M is a Type BSD self-drilling and tapping screw with a #3 drill point, so it drills its own hole and cuts its own thread in one pass through steel. Metallics notes drill time of about 2.5 seconds through a 1 mm thick plate.
2) Does the washer come attached to these screws or do I order it separately?
The washer is part of the screw, nothing to order separately. It measures 0.480 to 0.520 inch outside diameter and 0.030 to 0.050 inch thick, which spreads the clamp load on sheet metal and strut so the head does not pull through thin material.
3) What size driver or socket do I need for these 3/8 indented hex head screws?
A 3/8 inch hex socket or nut driver. The head is an indented hex measuring 0.367 to 0.375 inch across the flats, 0.409 inch across corners, with a head height of 0.172 to 0.19 inch. There is no slotted or Phillips option, the drive is hex only.
4) How are the Metallics JTEKD9M screws packaged and what is the minimum order?
They ship in a jar of 1,000 pieces, and 1,000 is the order minimum. Figure roughly 12.21 lbs for the packed jar.
5) Are these zinc self-drilling screws suitable for outdoor or damp locations?
The JTEKD9M is carbon steel with a zinc finish, silver in appearance. Zinc plating is a mild corrosion coating meant for dry interior and protected work, electrical strut, panel and sheet metal fastening. For sustained exterior exposure or wet locations, use a stainless self-drilling screw instead. Metallics notes that minimum torque values are the same for stainless and steel self-drill screws, so switching to stainless for corrosion resistance does not cost you driving performance.
6) Do these screws meet Buy American or ARRA requirements for a government job?
The JTEKD9M is flagged compliant for both ARRA and Buy American in Metallics' product data, with country of origin listed as multiple. On a federally funded project, pull the origin documentation for the specific lot you receive, since it is a multi-source item.
7) What standards do the Metallics JTEKD self-drilling screws are built to?
Dimensions follow ASME B18.6.3-2010 and the thread form follows SAE J78-2013, with UNC threads at 14 per inch. Worth knowing for spec work: SAE J78 does not cover #7 diameter drill screws, so if a drawing calls out a #7 you will not find a J78 reference for it.
How fast can I get the Metallics JTEKD9M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEKD9M come with a warranty?
Absolutely. The Metallics JTEKD9M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEKD9M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEKD9M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!