Metallics TEKD95M 14 x 3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics TEKD95M 14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 5000qty

Metallics TEKD95M 14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TEKD95M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
14 x 3/4 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - Steel Zinc - 5000qty

  • Additional Notes

    • Other sizes and quantities available by request. | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • #3 Drill Point
    • Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick plate.
    • Steel Zinc Material
    • 3/8 Indented Hex Head with Hex Drive
    • 14 Diameter, 3/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
5000 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#3
Drive Type:
Hex
Fastener Head Height:
0.172 - 0.19 in.
Fastener Head Type:
Indented Hex
Fastener Head Width:
0.367 - 0.375 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C32-40
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Head_Self-Drill_TS_Indent_Hex_Washer.pdf
Order Minimum Imperial:
5000
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Product Group:
Fasteners
Product Height:
10.75 in
Product Length:
11.5 in
Product Weight:
61.5 lbs
Product Width:
11.5 in
Remarks:
The catalog UPC differ from the tarnsaction daat spreadsheet UPC
Screw Point Type:
Drill Point
Slot Depth:
0.083 - 0.101
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Standard:
SAE J78 - 2013
Washer Od:
0.480 - 0.520 in.
Washer Thickness:
0.030 - 0.050 IN
Width Across Corners:
0.409
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEKD
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics TEKD95M – Frequently Asked Questions

1) What size socket or driver do I need for the Metallics TEKD95M self-drilling screw?
It takes a 3/8 inch hex driver. The head is an indented hex washer head measuring 0.367 to 0.375 inch across the flats and 0.409 inch across the corners, with a head height of 0.172 to 0.19 inch. A standard 3/8 inch magnetic nut setter in a screw gun drives it.
2) How thick a steel can a #3 drill point self-tapping screw go through?
The TEKD95M carries a #3 drill point, which is the mid-range point for structural-gauge steel rather than thin sheet. It drills and taps its own hole in one pass, so no pilot is needed. Reference drill time is 2.5 seconds through a 1 mm plate. At 3/4 inch overall length, the usable grip is limited, so stack thickness plus any washer or panel must leave enough thread engaged in the steel.
3) What standards do the Metallics TEKD95M self-drilling screws meet for a submittal?
Three to cite on a submittal: dimensions to ASME B18.6.3-2010, threads to SAE J78-2013, and material to AISI 1016-1024 with a case hardness of Rockwell C32-40. It is also flagged ARRA compliant and Buy American compliant.
4) Does this Metallics screw come with a sealing washer or just a bonded steel washer?
The washer on the TEKD95M is an integral part of the head, not a separate neoprene sealing washer. Washer outside diameter runs 0.480 to 0.520 inch with a thickness of 0.030 to 0.050 inch, and the whole fastener is zinc-plated steel. For a weatherproof roof or wall panel joint you want a screw with an EPDM or neoprene bonded washer instead; this one is a bearing washer for load spread, not a seal.
5) Is zinc-plated steel OK for outdoor or damp use, or should I buy stainless self-drillers?
The TEKD95M is zinc-plated carbon steel, which is a dry interior and protected finish. For exterior exposure, roof decks, coastal air, or chemically treated lumber, go stainless. One note for spec work: minimum driving torques are the same for stainless and steel self-drill screws, so switching to stainless does not change your tool setup.
6) Will a #14 x 3/4 hex washer head self-driller work for hanging strut and electrical boxes on metal studs?
That is the common use for it. The #14 diameter with a #3 drill point bites metal framing without a pilot hole, the 3/8 hex washer head spreads load on strut, clips, and box ears, and the 3/4 inch length keeps the point from protruding far behind a stud flange. It is a Type BSD self-drilling and tapping screw, carried on the electrical side of the catalog for exactly this kind of work.
7) Can I get this Metallics screw in other lengths or diameters?
Yes. The JTEKD series runs other sizes and quantities, available by request. The TEKD95M specifically is the 14 x 3/4 inch zinc steel version with the #3 point and 3/8 indented hex washer head.
How fast can I get the Metallics TEKD95M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TEKD95M come with a warranty?
Absolutely. The Metallics TEKD95M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TEKD95M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TEKD95M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!