You may also like
1H JMPR BRD ASY4 700 H9/16-7/16 L12
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Non-Insulated
- Product Group:
- Grounding & Bonding
- Product Net Depth Length:
- 12 in304.8 mm
- Product Type:
- Extra-Flexible Jumper Braid
- Selling Unit Of Measure:
- each
- Standards:
- NEMA
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn FBE1H070A2-12 – Frequently Asked Questions
1) How long is the Blackburn FBE1H070A2-12 jumper braid?
The FBE1H070A2-12 braid assembly is 12 inches long, which works out to 304.8 mm. That is the overall length of the assembly, so plan your bonding path across the joint, expansion fitting, or hinged panel with slack for movement rather than pulling it taut.
2) Is this Blackburn bonding jumper insulated?
No. The FBE1H070A2-12 is a non-insulated extra-flexible braid, so bare copper braid is exposed along its length. If the run passes close to energized parts or other conductive surfaces, route it clear or sleeve it in the field.
3) Why use a flexible braid jumper instead of a solid bonding conductor across a movable joint?
Braid is what you want anywhere the two bonded points move relative to each other: expansion joints in raceway, hinged enclosure doors, vibrating motor or generator bases, and equipment on isolators. An extra-flexible braid such as the FBE1H070A2-12 flexes repeatedly without work hardening the way a solid or stranded conductor does. For a fixed run between two rigid points, an ordinary bonding jumper wire and lugs is the simpler choice.
4) Does the Blackburn FBE1H070A2-12 come as a complete assembly with terminals, or just the braid?
It ships as a jumper braid assembly, meaning the braid comes with its terminal ends already attached, so there is no crimping or brazing on site. You supply the bolts, nuts, and washers to land each end on your ground bar, enclosure, or equipment pad.
5) Is the Blackburn FBE1H070A2-12 made in the USA, and does it meet a recognized standard?
Country of origin is the United States, and the braid is built to NEMA standards. That covers the two things institutional and government buyers usually have to document on a grounding submittal: domestic origin for Buy American language and a recognized standards reference for the spec sheet.
6) Is the Blackburn FBE1H070A2-12 sold individually or in a pack?
Sold each. The selling unit is one 12 inch braid assembly, so for a run of expansion fittings or a row of hinged panels order one per joint.
7) What is the exact part number to quote for this Blackburn jumper braid?
Quote Blackburn FBE1H070A2-12. It is a single-model item, a 12 inch non-insulated extra-flexible grounding braid assembly, so there are no finish or length options to specify alongside it.
How fast can I get the Blackburn FBE1H070A2-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn FBE1H070A2-12 come with a warranty?
Absolutely. The Blackburn FBE1H070A2-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn FBE1H070A2-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn FBE1H070A2-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.