You may also like
1H JMPR BRD ASY2 500 H9/16-7/16 L12
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Non-Insulated
- Product Group:
- Grounding & Bonding
- Product Net Depth Length:
- 12 in304.8 mm
- Product Type:
- Extra-Flexible Jumper Braid
- Selling Unit Of Measure:
- each
- Standards:
- NEMA
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn FBE1H050A2-12 – Frequently Asked Questions
1) How long is the Blackburn FBE1H050A2-12 bonding jumper braid?
The braid assembly measures 12 inches (304.8 mm) in length, which is the figure the L12 in the part number refers to. That gives you enough slack to bond across an expansion fitting, a hinged enclosure door, or a section of raceway where movement or vibration would fatigue a solid conductor. It ships and is priced as a single piece, not a pack.
2) Is this Blackburn jumper braid insulated?
No. The FBE1H050A2-12 is a non-insulated flat braid with terminal ends, so bare copper braid is exposed along its length. Keep that in mind if it will be routed near energized parts or across a panel where an accidental contact matters; where you need a covered conductor, use an insulated bonding jumper instead.
3) Why use a flexible braid instead of a solid or stranded bonding jumper?
An extra-flexible braid is the part you reach for where the two bonded points move relative to each other: expansion or deflection fittings in conduit runs, hinged equipment doors, vibrating motor frames, and switchgear sections. A flat braid flexes repeatedly without work-hardening and breaking the way a solid bonding conductor does. Where nothing moves, a plain bonding jumper or grounding conductor is the simpler choice.
4) How do I order the exact Blackburn braid I already have installed?
Order by the full manufacturer part number, FBE1H050A2-12. The suffixes carry the specifics: 12 is the 12 inch length and H9/16-7/16 is the pair of terminal hole sizes, so a braid with a different length or different hole sizes carries a different number. Confirming the printed number on the existing braid is the quickest way to get a matching replacement.
5) Does this Blackburn bonding braid meet a recognized standard, and where is it made?
The FBE1H050A2-12 is built to NEMA standards and is manufactured in the United States. That matters on public and institutional work where domestic origin is a bid condition, so the part number and country of origin are worth recording on the submittal.
How fast can I get the Blackburn FBE1H050A2-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn FBE1H050A2-12 come with a warranty?
Absolutely. The Blackburn FBE1H050A2-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn FBE1H050A2-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn FBE1H050A2-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.