You may also like
2-HOLE EX FLEX JUMP 2 BRD LEN 14IN
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Non-Insulated
- Product Group:
- Grounding & Bonding
- Product Net Depth Length:
- 14 in355.6 mm
- Product Type:
- Extra-Flexible Jumper Braid
- Selling Unit Of Measure:
- each
- Standards:
- NEMA
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Grounding Devices
Blackburn FBE2H070A1-14 – Frequently Asked Questions
1) Is the Blackburn FBE2H070A1-14 jumper braid insulated?
No. It is a bare, non-insulated braid. For bonding across expansion joints, equipment frames, raceway sections, or enclosure doors that is normally what you want, since the conductor is meant to be exposed and inspectable. If the run passes anywhere a bare conductor could contact an energized part or a dissimilar bonded surface, sleeve it or route it clear.
2) What does the two-hole termination on this Blackburn flexible bonding jumper mean for mounting?
Two-hole means each end lands on two fasteners rather than one, so the connection cannot rotate loose under vibration. Plan for a two-bolt pattern at both ends, matched to the hole spacing on the braid, and use hardware suited to the equipment pad or busbar you are landing on. Mounting bolts are not part of the item.
3) Where would an electrician use an extra-flexible braided jumper instead of a solid bonding conductor?
Use the braid where the two bonded points move relative to each other, or where you need to absorb vibration: equipment enclosure doors, motor and generator frames, transformer pads, conduit expansion and deflection fittings, and busbar sections. A solid or stranded copper bonding conductor is the better choice for a fixed run that does not flex. The Blackburn FBE2H070A1-14 is the extra-flexible braid type.
4) What part number do I order to match an existing Blackburn 14 inch two-hole bonding braid?
Order by manufacturer part number FBE2H070A1-14. The suffix carries the 14 inch braid length, so a different length in the same family will show a different trailing number. If you are matching an installed jumper, check both the hole pattern and the bolt-to-bolt distance against the 14 inch braid before you commit.
5) Does the Blackburn FBE2H070A1-14 meet a recognized standard, and where is it made?
It is built to NEMA and made in the United States. That matters on public and institutional work where domestic origin is written into the purchase order, so it is worth keeping on record if you are standardizing bonding jumpers across a facility.
How fast can I get the Blackburn FBE2H070A1-14 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn FBE2H070A1-14 come with a warranty?
Absolutely. The Blackburn FBE2H070A1-14 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn FBE2H070A1-14?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn FBE2H070A1-14 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.