You may also like
2 PORT SAME SIDE MULTI TAP 250-6
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- AMT Connector
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Electrical taps
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Color:
- Black
- Product Material:
- Aluminum
Blackburn AMTS25062 – Frequently Asked Questions
1) What wire range does the Blackburn AMTS25062 multi-tap connector accept?
The AMTS25062 is a 250-6 tap, meaning the conductor ports take wire from 250 kcmil down to 6 AWG. Both tap ports are on the same side of the body, so the branch conductors run out in one direction rather than splitting left and right.
2) Is a Blackburn AMTS25062 aluminum tap rated for use on copper conductors too?
The body is aluminum, which on Blackburn's AMT series taps is the dual rated construction used for both copper and aluminum conductors. It is UL listed under file E9809 and rated 600 V, so it suits feeder and branch taps in panels, gutters, and junction boxes at standard building voltages.
3) Can I use this 600 V multi-tap on a 480Y/277 V service?
Yes. At a 600 V rating the AMTS25062 covers 120/240, 208Y/120, and 480Y/277 V systems, which is everything short of medium voltage in a commercial building.
4) Do I need insulating cover or tape over this tap connector after I land the conductors?
Yes. The AMTS25062 is a bare mechanical tap, not an insulated device, so the installed connection has to be insulated in the field with tape, a shrink boot, or a snap-on cover, or else enclosed where no insulation is required. No cover ships with the connector.
5) Same side versus opposite side multi tap, which one do I want in a tight gutter?
Same side, like the AMTS25062, brings both tap conductors out of one face of the block. That is what you want when the branch runs all head the same direction or when the connector sits against a wall or panel side and you cannot get a bend radius on the far side. Pick an opposite side version when the taps feed away from each other and routing both out the same face would crowd the wireway.
6) How is the AMTS25062 sold, individually or in a box?
It is sold each, one connector per unit, under part number AMTS25062. For a three-way or four-way splice you order multiple pieces or step up to a higher port count in the same AMT series.
7) Is this Blackburn tap block black anodized or plain aluminum?
The finish is black, over the aluminum body. Country of origin is Mexico.
How fast can I get the Blackburn AMTS25062 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AMTS25062 come with a warranty?
Absolutely. The Blackburn AMTS25062 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AMTS25062?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AMTS25062 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.